Optiplex 3050 SFX Psu Adapter for MT only
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a SFX (NOT SFX-L) psu adapter to replace the stock psu on MT units. Works on Dell Optiplex 3040, 3050, 7040,
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- BSD License
This is a SFX (NOT SFX-L) psu adapter to replace the stock psu on Dell Optiplex 3040, 3050, 7040, 7050 (that I know of) for Mini Tower only.
Please take note.
1. The psu fan orientation upward or downward will depend on the 3 pin power input location.
2. The power switch might be obstructed by the case (depends on model). You will have a gap of 5.6mm.
3. It is advised to use full modular psu since some connectors will be blocked by the 2.5" bay once closed.
4. You will need to bend 1 metal which was originally holding the stock psu to make it fit.
Please use PETG filament as it has better heat resistance than PLA.
I will not be responsible for any accidents occured when using this design.