IKEA ALEX Handle 2024
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA ALEX handle that can be pulled from top or bottom and sits flush on the inside, mimics the original cutout shape.
- Ocena
- 4 / 5
- Polubienia
- 25
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 765
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by the multitude of IKEA Alex handles out there.
This one however has the shape traced based on an outline photo of the actual drawer curve.
Additionally I was looking for a handle that can be pulled on from both top and bottom.
3mf file includes all print settings with eSun PLA+ for a 0.4 nozzle, 15% infill and 40% infill modifiers for sections connecting the handle to the body (most likely they aren't needed, just a precaution).
Fusion f3d file can be edited to remove text or change screw holes for the hardware you have on hand.
Prints upside-down with no supports.
Additional hardware: I used 3.5x35mm wood screws with an 8mm head.
Note: This was created for an IKEA Alex 304.837.99 which was bought around May 2024. I own an additional similar Alex drawer from over 5 years prior - this does not fit.
P.S. It also seems to fit nicely on the wide drawers.