Raspberry Display Touch 2 support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand for the Raspberry Touch Display 2, designed to be used with a 1/4“ to 3/8” adapter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a stand for the Raspberry Touch Display 2, designed to be used with a 1/4“ to 3/8” adapter (see photo) to secure it using a camera tripod screw.
So as not to have to reprint the whole part if you want to change the mounting, I've made a mounting system that allows you to imagine any support and simply attach it to the base via 2 screws.
On the photos and to facilitate printing, I printed the part flat and heated it to bend it to the desired angle.
The parts are made with OpenSCAD, I'll provide the sources later.