Raspberry Display Touch 2 support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stand for the Raspberry Touch Display 2, designed to be used with a 1/4“ to 3/8” adapter.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a stand for the Raspberry Touch Display 2, designed to be used with a 1/4“ to 3/8” adapter (see photo) to secure it using a camera tripod screw.
So as not to have to reprint the whole part if you want to change the mounting, I've made a mounting system that allows you to imagine any support and simply attach it to the base via 2 screws.
On the photos and to facilitate printing, I printed the part flat and heated it to bend it to the desired angle.
The parts are made with OpenSCAD, I'll provide the sources later.