Wordle peg grid - necklace or brooch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Place the colored pegs on the pegboard to replicate your Wordle achievement grid. Wear as a necklace, badge...
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 802
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not only can you brag about your Wordle achievements on twitter but you can now proudly wear them as a necklace or a badge 😂
🟨⬛⬛⬛⬛
🟨⬛⬛⬛🟨
🟨🟩🟨⬛🟩
🟩🟩🟩🟩🟩
Place the colored pegs on the pegboard to replicate your Wordle achievement grid.
Use the 6 row board if you were struggling today, 5, 4, 3, 2 rows. Or even 1 row for the word-in-one lucky days.
The boards have a hole on each side to pull a string or a cable through.
Use it as a brooch or badge with the clipsable mount on which you can glue a brooch pin.
About the print :
Nothing special about the boards, I printed them facing flat on the print bed. I went for 0.2mm but any layer height should be alright.
--
Printing the pegs can be a bit trickier. I recommend checking the 3mf file to start with the setting I used, and adapt to your printer if necessary.
The stl has a modeled support built in.
I chose to print the pegs upright because it is the only orientation where the compliant holding fingers stay solid.
In my case I had no problem detaching the supports with a sharp blade.
A perfect bed adhesion is crucial to their printing because they have very little contact surface to the bed, and I didn't want to add a raft.