Wordle peg grid - necklace or brooch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Place the colored pegs on the pegboard to replicate your Wordle achievement grid. Wear as a necklace, badge...
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 44
- Makes
- 1
- Views
- 802
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Not only can you brag about your Wordle achievements on twitter but you can now proudly wear them as a necklace or a badge 😂
🟨⬛⬛⬛⬛
🟨⬛⬛⬛🟨
🟨🟩🟨⬛🟩
🟩🟩🟩🟩🟩
Place the colored pegs on the pegboard to replicate your Wordle achievement grid.
Use the 6 row board if you were struggling today, 5, 4, 3, 2 rows. Or even 1 row for the word-in-one lucky days.
The boards have a hole on each side to pull a string or a cable through.
Use it as a brooch or badge with the clipsable mount on which you can glue a brooch pin.
About the print :
Nothing special about the boards, I printed them facing flat on the print bed. I went for 0.2mm but any layer height should be alright.
--
Printing the pegs can be a bit trickier. I recommend checking the 3mf file to start with the setting I used, and adapt to your printer if necessary.
The stl has a modeled support built in.
I chose to print the pegs upright because it is the only orientation where the compliant holding fingers stay solid.
In my case I had no problem detaching the supports with a sharp blade.
A perfect bed adhesion is crucial to their printing because they have very little contact surface to the bed, and I didn't want to add a raft.