Go-Play 3.0 Ultimate

The ULTIMATE Portable Mame/Retro-Controller!
https://www.youtube.com/watch?v=TQyIhMP2lsQ

PERFECT ORIGINAL CONTROL for games like:
Tron
Afterburner
Missile Command
Arkanoid
Kaboom
Tempest
and MORE!

Takes inspiration from and includes models and dimensions from:
https://www.thingiverse.com/thing:4065881
https://www.thingiverse.com/thing:2021152
https://www.thingiverse.com/thing:2099016
https://www.thingiverse.com/thing:768663
https://www.thingiverse.com/thing:3437219
A HUGE Thank you to those makers for their contributions to this project.

Most original Picade parts have been completely re-drawn for better geometry.
Some parts include built in supports. No supports should be needed for any part except the FRC and FLC, needing tree supports for the Screw tabs. Set angle to 86%-ish (Easy)
Bring your bridging A-Game for this one! ;-)

Features:

• Module based construction allows printing on ANY 150x150x150+ 3D Printer
• Dual SoC mounts (All Rpi Versions, Odroid N2+, Room for all others)
• 8 Way joystick / Afterburner joystick with top / trigger buttons
• 14 Programmable illuminated buttons (16 With Afterburner Joystick)
• Arduino arcade spinner (Illuminated)
• USB Trackball (Illuminated)
• 200 Watt Bluetooth / Aux sound built In (LOUD, Clear, fills a room easily)
• 2.1 Sound Configuration, including active 4" subwoofer, and premium 3.5" midrange drivers, Trebble, Bass, and Frequency Adjustment.
• 12/5V Power Supply (10 Amp @ 12.1v, buck converted down to 5.1v)
• Ample space/locations for USB hard drives inside the unit.
• 2d Rally wheel included for spinner for basic 2d rally type games
• Handle accessory files included for a Layback handle that acts as a 15.6 portable USB-C Monitor stand
• Original .skp files included for INFINITE Customization!
• Spare templates for the spinner, speakers, buttons, and more!

Compatible with the Sinden Lightgun for a 100% Complete Retro Control Experience.
All in one Portable Box!
https://sindenlightgun.com/

I am in the final stages of the Creation Process and will soon:

• Create a full written build guide with assembly photos
• Create a full BoM gsheet for sourcing the parts needed
• Create an assembly video on YouTube showing the fill build process

Will eventually include:

• Full Sim racing wheel
• Full Sim shifter and pedals
• Throttle control module
• Light Gun Holster
• Full Size Cabinet Conversion Plans
• Back Left corner Rework for ITX Mainboard and I/O Panel (Full conversion from SoC to PC)

STAY TUNED FOR MUCH MORE!

(This project is being actively developed as of 1/29/2023)

Buid cost as shown: Estimated 425$ including plastic

NOTE: Wheel is 300x300mm and needs a larger printer to get printed. NEEDS supports

Parts that i've printed, and found geometry issues with, and repaired...
ALL Parts are confirmed printable at this time.

Print Settings

• Printer:

Ender 5 - Linear+Exoslide+Klipper

• Rafts:

No

• Supports:

No

• Resolution:

.20

• Infill:

20%

• Filament brand:

PolyMaker

• Filament color:

Black/Grey/Custom

• Filament material:

PLA, PLA+, PLA Pro, ASA, ABS, PETG

• Notes:

Bridging areas up to 1" is REQUIRED for this model.
You will need a GOOD part cooling fan, and I STRONGLY recommend printing this in PLA to see what challenges it may present PRIOR to using a more permanent/expensive plastic.

x25 Total parts to complete a full assembly

Post-Printing

Spinner Construction

To construct the Spinner please see the following Thing:
https://www.thingiverse.com/thing:4065881

(Copied From Above Thing)
List of parts used:
600p/r Incremental Rotary Encoder Dc5-24v 6mm Shaft
Arduino Pro Micro ATmega32U4 5V 16MHz Micro-USB Development Module Board
CNC Aluminium Alloy Volume Control Knob 6mm Hole with Set Screw
Micro USB Cable
3 - 8mm M3 screws
4 - 3/8" Phillips countersink screws
(this thing) 3D printed mounting disc/template https://www.thingiverse.com/thing:4065881
3D printed Arduino Pro Micro housing and Arduino sketch "spinner_no_buttons.ino" https://www.thingiverse.com/thing:4065889/
Installation instructions and MAME DIAL SETTINGS chart https://docs.google.com/document/d/1LNWvXfLu1R1BIbdRE4Ho2E5RHNSW2niEuBgavP57IrU/

Bill of Materials (Incomplete)

This will eventually be a completed bill of materials:

Arcade USB Encoder:
https://www.amazon.com/Guwarry-2-Player-Joysticks-Raspberry-Arcade1Up/dp/B07RNQLMJR/ref=sr_1_6?keywords=Arcade+USB+Encoder&qid=1671768624&sr=8-6

Arcade Trackball: (Illuminated)
https://www.amazon.com/dp/B07HJ3BC33?psc=1&ref=ppx_yo2ov_dt_b_product_details

30mm Arcade Buttons: (Illuminated)
https://www.amazon.com/dp/B01N056ZK5?psc=1&ref=ppx_yo2ov_dt_b_product_details

16mm Arcade Buttons: (Illuminated)
https://www.amazon.com/dp/B00XW2LH0U?psc=1&ref=ppx_yo2ov_dt_b_product_details

8-Way Flight Joystick with Top button and Trigger:
https://www.amazon.com/dp/B07874YDKL?psc=1&ref=ppx_yo2ov_dt_b_product_details

8-Way Joystick (Standard):
https://www.amazon.com/Starts-Classic-Competition-Joystick-Machine-Stickers/dp/B01N0DO631/ref=sr_1_6?crid=3V0ZMHI0HR9R9&keywords=8-way+joystick&qid=1671769092&s=videogames&sprefix=8-way+joystick+%2Cvideogames%2C135&sr=1-6

Rotary Encoder for Spinner
https://www.amazon.com/dp/B085ZLCYS1?psc=1&ref=ppx_yo2ov_dt_b_product_details

Arduino Pro Micro for Spinner:
https://www.amazon.com/dp/B012FOV17O?psc=1&ref=ppx_yo2ov_dt_b_product_details

Odroid N2+ (I used the 4GB model)
https://ameridroid.com/products/odroid-n2-plus

Bluetooth 2.1 Amplifier:
https://www.amazon.com/dp/B089KT3FG9?psc=1&ref=ppx_yo2ov_dt_b_product_details

3" Full Range Speakers x2:
https://www.amazon.com/dp/B00K2ESJZ2?psc=1&ref=ppx_yo2ov_dt_b_product_details

4" Woofer:
https://www.amazon.com/gp/product/B077FHPGM4/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1

Right Angle USB Adapters
Right Angle HDMI Adapters
Right Angle 3.5mm Headphone jack adapters
USB Hub x3-4 port

Bluetooth Dongle - if desired
WiFi Dongle - if desired

TO DO LIST:

Redraw RPi Mounting holes on Back Left Part - Holes not printing correctly
(Part prints correctly otherwise)
*COMPLETED - NEW PART UPLOADED

Round more edges and refine overall "Look"

Cut holes for DC Jack in

• Draw location for 4s Lithium Battery