RGBtoHDMI LumaCode Case for c0pperdragon's "RGBtoHDMI Mono & LumaCode"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for c0pperdragon's "RGBtoHDMI Mono & LumaCode"
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is a case designed for c0pperdragon's RGBtoHDMI Mono & LumaCode. It holds both the RGBtoHDMI board and Raspberry Pi Zero. This is a remix of djos_1475's design. https://www.printables.com/model/92380-rgbtohdmi-case. The main change for this remix is modifying the video input hole to fit c0pperdragon's cable for his RGBtoHDMI board https://www.tindie.com/products/c0pperdragon/rgbtohdmi-mono-lumacode/. I also tightened up the holes around the ports, made the Micro SD card slightly easier to remove, added material between the two Micro-USB ports, and added the text “PWR” next to the right Micro-USB port. Two M2.5 screws are needed to mount the Raspberry Pi Zero to the case, and two 11mm standoffs (also M2.5 if they are threaded) are needed to help support the RGBtoHDMI board when connected to the Pi Zero.