1 / 6
Family Love Puzzle Nightlight
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Love Puzzle Nightlight (LEDs and "LOVE" word are optional)
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (36)Powiązane
A nightlight I made for my beloved wifey. We have 2 kids, hence here are 2 small consequences of our big love :)))
LEDs and ‘LOVE’ are optional. Please see 4 basement options attached. If you are not good at soldering - that is not a problem. If you need a switch to be added - let me know. There will be 5th basement version created. ;)
Printing settings:
- no raft
- layer height 0.15-0.2mm
- no supports required. It is important to have have fancy bridges as the bears family is intended to be printed w/o supports. Ignore this if you do not plan to install LEDs.
- since LEDs provide heat it is recommended to use PETG for basement, not PLA.
- after 20mm of bear model printing, you will need to set a pause and change the filament to black for the remaining 0.5mm (noses, eyes contours). As alternate - print the whole model with white or any other filament color and paint features with a black permanent marker after that.
Materials used for LEDs:
- wires
- 4x LEDs
- 1x PD 12V trigger
- 1x 10 Ohm resistor to limit current draw to ~50 mA.
!NOTE! Resistor is obligatory as these 1W LEDs are powerful enough to make plastic and even soldered connection melt!
Support creator here: