Precision Tolerance Test (0.3-0.1 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Precision tolerance test. It features 4 labeled models which go from 0.3mm down to 0.1mm tolerance. Made with FreeCAD.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
While working on another project, I felt the need to make a simple but effective tolerance test. Then I thought about uploading it here for free in case anyone ever needed it too.
Since the tolerances of this test go down to 0.1mm, I highly recommend to set your slicer walls settings to Outside-Inside, in order to increase the chances of success.
Each test model has a label on it, in order to make it more recognizable if it gets lost/mixed among other printed tests.
In conclusion, here's a brief explanation of the uploaded files:
- Tolerance_Test.stl → Complete tolerance test (0.3-0.1mm) + Test Cube (inside the 0.3 model);
- Tolerance_Test-<value>.stl → <value>mm test (without Test Cube);
- Tolerance_Test-TestBlock.stl → Little block used to check tolerances;
- Tolerance_Test.FCStd → FreeCAD Project.
In case you edit and reupload my models, please give the proper credits.