Under Sofa/Couch Gate Blocker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple fence system used to keep toys and other items from rolling under the couch.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 211
- Wydruki
- 0
- Wyświetlenia
- 978
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
After constantly getting cat toys under my couch, I decided to make my own under-couch blocking system that looks decent.
Due to some couch sag, I printed mine with some small supports that keep the system in place where the pieces don't fit under completely.
Small connectors piece them together. The longer connector allows ¾” gap for extension cords and similar.
The main part of the gate is 200L x 76.2H (3”). Support pieces on the back are roughly 8.2 below the top. This is not as strong as it could be, but my priority was printing quick and stopping small, lightweight toys. But it did stand up against my roomba.
Printed in PLA, 10% infill, no supports. Please leave a make, let me know how it worked for you and if you have any feedback. Thanks!