1 / 9
Ender 3 V3 KE/SE Filament Runout Sensor Case/Cover (CUSTOM FOR EITHER KE OR SE!!!)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Printer's Runout Sensor Started Looking Kind of Bland In My Printer Setup, So I Created This Cover/Case!!
- Ocena
- 4,25 / 5
- Polubienia
- 19
- Pobrania
- 119
- Wydruki
- 5
- Wyświetlenia
- 756
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 5) (Komentarze: 10)Remiksy (1)Kolekcje (24)Powiązane
I created this cover/case for my printer's runout sensor since it looked really out of place for my printer. This cover is designed to mimic the look of the extruder of your printer. In total, it only costs 18 Grams of Filament to print.
KE:
Print the Front Cover Labeled for the SE, and the universal Back Cover.
SE:
Print the Front Cover Labeled for the SE, and the universal Back Cover.
How to Print:
- FOLLOW THE IMAGES FOR PRINT ORIENTATION (So that it doesn't break when clipping together)
- Use tree supports for the Back Panel
- Use Normal supports for the Front Print.
- Print in 0.12mm (0.4 mm Nozzle) This worked Like a charm
Note: Be sure to dial in your support settings as it greatly helps with the removal process.
