1 / 2
Extended Base for CHEETAH
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This extends the base of the CHEETAH flatbox so that it is 380mm in width
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
Changes from the Original
- The bottom part of the CHEETAH enclosure is split into two to achieve a total width of 380mm.
Assembly
- This uses the same screws as the original CHEETAH
Printing Suggestions
- 4 Walls / 20% Cubic Infill / No Supports
- Set “Top Surface” to 80% to ensure there is no over-extrusion, and to achieve a very smooth surface. Or use ironing--if you have it dialed in.
- Only tested in PLA, but other materials should work--provided they have minimal warping/shrinkage
- Designed for 220mm x 220mm x 250mm build volume
- The flattest part of the model should face the bed
- Recommend an enclosed 3d printer. The sharp corners of the body will likely lift from the build plate as the filament cools. Additionally ensure good adhesion to the build plate.
- Or, use mouse ears on the sharp corners.
MISC
- Also compatible with the non-OS version of the CHEETAH.