1 / 2
Extended Base for CHEETAH
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This extends the base of the CHEETAH flatbox so that it is 380mm in width
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 1
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
Changes from the Original
- The bottom part of the CHEETAH enclosure is split into two to achieve a total width of 380mm.
Assembly
- This uses the same screws as the original CHEETAH
Printing Suggestions
- 4 Walls / 20% Cubic Infill / No Supports
- Set “Top Surface” to 80% to ensure there is no over-extrusion, and to achieve a very smooth surface. Or use ironing--if you have it dialed in.
- Only tested in PLA, but other materials should work--provided they have minimal warping/shrinkage
- Designed for 220mm x 220mm x 250mm build volume
- The flattest part of the model should face the bed
- Recommend an enclosed 3d printer. The sharp corners of the body will likely lift from the build plate as the filament cools. Additionally ensure good adhesion to the build plate.
- Or, use mouse ears on the sharp corners.
MISC
- Also compatible with the non-OS version of the CHEETAH.