Electrolux non-rectangular repair part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a support part for broken hoses of Electrolux branded vacuum cleaners. For certain models only, see description.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a model which I designed for my broken Electrolux vacuum hose.
It attaches two parts (colored in red and green) together using a tight fit adapter.
If your broken part looks like this, you can use this adapter as a support for the broken part.
You can change the fit by scaling the model by a few percent. A glue might strengthen the fit, you should consider it.
I printed it horizontally (using supports) for more strength, due to the fact that I only had PLA available. However, vertical printing could also work.