Fanduct chroma_mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fanduct change the direction of the airflow from blowing on the silicon sock.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This mod is design for the original Chroma printhead. With this mod you cool the printed part and not the silicon sock.
Never back to original !!!!!!!!!!!!!!!
The only thing is you need to make space to fit in the Chroma cover!!! to do this print the cut out marker so that you can indicate where you are going to cut/saw ore grind. go slow do not cut to much we dont want the gaps to big.
Print this mod than remove the chroma fanduct by unscrew the screw in the cover. try to fit the new fanduct and if you thinks its good use the cut out marker and cut.
print setting:
ABS ore ASA ore higher temp filament only. Otherwise it will melt. the most o the part are 2 wals so go slow and use support. added a fanduct with less support (didn’t test yet)
Fan control in klipper:
[fan]
pin: cp_Head:PC9
max_power: 1.0
kick_start_time: 0.5
off_below: 0.10
cycle_time: 0.010
hardware_pwm: False
Fan control in orca: I always check what i sliced and what I use on the print for cooling behavior. So this is a example for what i use to test this.
