Liczymy pasujące modele…
UPDATE: A working print head mount is now posted. My original was too high and would not home successfully. And Valerie Moore did a nice cleanup job on that if you are a perfectionist and want the nicest looking hidden surfaces! I have…
10% Infill .2 Layer Height Print in PETG Print 2 Pegs from Soarpix's Skadis accessories pack for mounting. Requires use of the CX-Uno Extruder Housing Modification for tighter spacing. Uses aluminum extruder mounts included with coprint…
These brackets allow the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. I made two versions…
This bracket allows the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. This version is my…
Print just as you would a normal benchy, just with four different colors. In your slicer you can change the colors to whatever you want in the filament section. The Benchy_2 file adds 4 squares of each color with labels so you know what…
Align the 3 holes, use screws from the original hotend to mount to bracket, put square nuts in and screw Chromahead to them
UPDATE: A working print head mount is now posted. My original was too high and would not home successfully. And Valerie Moore did a nice cleanup job on that if you are a perfectionist and want the nicest looking hidden surfaces! I have…
Should be printed with at least PETG Place in the square nuts Plug in cable to Eddy, route the cable in mount, mount the Eddy with shorter screws provided Screw the cable holder at the top of the mount Place mount onto bracket lining up…
Print as already oriented. No supports required. Print the square nut version if using hardware provided by CoPrint, otherwise print the regular nut version if needed. Follow the PDF to learn how to set up the board and to do Resonance…
Simple Quick tool to hold all 8 of those crazy bowden tubes on a fully decked out CoPrint Chroma Set or KCM setup. I recommend using the ones with the 7 holes around and one in the center when you get halfway down your tubes. Leave about…
fixed some modeling errors and made it so it has the original mounting option still.
this is a much tighter fit and clips on to the top rail of the SV08. also split the CoPrint stepper mount
made 2 versions. one with the original mounting nuts and one for heated inserts. M3 4mm this will be way lighter, stronger, and set at a better location then the thrown together last minute mount, they have for the official release. I got…
Wall mount for CoPrint systems KCM and ECM modules. Includes both Combined and individual mounts, as well as 8-in-1 PTFE guide tube spacers for that cleaner look. Various sizes included for printer tolerances. Cable management tracks…
This adapter enables the Creality K1 to work with the Co-Print Chromahead. It’s easy to install and enhances multi-material printing.
Long Version: Fixed internal geometry to remove leftover edges that could cause uneven internal feed surface when printed at fine layer heights ( Added additional 8th filament pathway to accommodate use with the ChromaPrint System Short…
This hook is designed for the 4CX-1 extruder holder on the Creality K1. It ensures the holder stays securely attached to the printer's frame, preventing it from tilting backward over time. The design is simple, functional, and easy to…
These connection block and hooks are designed to mount up to 8 extruders (4 on each side) on the Creality K1. The placement ensures compatibility with the printer's lid when using the CoPrint lid raiser. The design allows efficient use of…
Circular Ring Cooling setup. Designed to fit both the Stock and Ceramic Ring Hotend. Centered around the nozzle tip. Uses stock fan. Screws: 1x Short M3 screw (8-10mm up to 20mm) 3x M3x20mm 1x M3x25mm Installation: Installed by mounting…
I wanted my Coprint extruders and spools to be mounted on top of the printer with the spools on a rollers using 608 ZZ bearings. extruders mount using their included screws and the spool / clip attached with an M3 or M4 (can't remember…
This design was created by the support team at CoPrint. [email protected] I requested the design, and this is what they sent. A new front mount, and y stop block. This uses captive nuts. I re-mixed the front mount to use heat set…
All of the parts needed to mount the CoPrint Chroma head on a Rat Rig V-core 3 system. Use the original hardware (bolts, etc) from the Rat Rig Eva mount
This is one part of the CoPrint system that I made for the Rat Rig install. The mount for the Chroma Head https://www.printables.com/model/1191837-coprint-mount-for-rat-rig-v-core-3
UPDATE(03/16/2026): COMPLETE! Instructions have been updated for securing the nozzle as detailed below in the previous update. This proves much better and the ceramic spacers have been removed from the instructions. All part variations…
Mount for the Coprint KCM on the Creality Ender-3 V3 Plus with space for excess cable slack. Makes the 4-color upgrade kit cleaner without cables dangling everywhere. Includes cable guides to attach the Chromahead cable to PTFE-tubes and…
I thought there was room for improvement on the Creality/Coprint multicolor kit. The Chromahead mounted on the stock carriage sticks out quite far and in combination with the assymetric nozzle placement it reduces the print area from…
Supports and Support “Bricks” Front: 6 x (4 mm x 15 mm) Wood Screw Back: 6 x (4 mm x 30 mm) Wood Screw Generic PETG (the cheapest I found with the right color) KCM/ECM Base Clip This is clipped onto the top right of the printer. The holes…
PTFE-tube organizer to keep PTFE-tubes and the ChromaHead cable tidy and out of the way. Prints in no time! Material: PLA (or whatever you like) Infill: 10-20 % Rectilinear, Grid, Honeycomb … See it in the full guide to convert a Creality…
I don't have plans right now to go beyond 4 colors, so designed a 4 in 1 to replace the 8 in 1 and get rid some wasted space and weight. Printed in PLA. Slotted the front screw hole to allow for adjustment of head to be parallel with…
This is a follow up to my previous 4 in 1 adapter for the CoPrint Chroma head. This one is threaded for PC4-M6 connectors. Great option is all you are going to use is 4 colors.
This is the corrected version of the original. The ring inner diameter was too tight, and it was causing it to melt. Increased clearance around the nozzle to prevent the ring from getting too hot and melting. The original CoPrint cover…
This is a follow up to my follow up of the original adapter for the CoPrint ChromaHead. If you are only going to use 4 colors, get rid of the heavy 8 in 1 and opt for the lighter 4 in 1 option. Now available in M10 threads.
I MESSED UP ON THE V1 OF THIS. I HAD MY NOZZLE IN THE WRONG POSITION ON THE MODEL. IT CREATED A HOT SPOT AND MELTED THE RING (SEE PIC). THIS IS AN UPDATED VERSION WITH A SLIGHTLY LARGER RING AND MY NOZZLE ORIENTED IN THE CORRECT POSITION.…
A more compact extruder for coPrint. It allows for the extruders to be mounted tight to each other to fit more of them in the same space.Was made for use with coPrint but can be used for other extruder purposes. BOM: BMG internal parts M3…
5/7/25 Update - After fitting a new X carriage I had to adjust the mount slightly. Now sits further back and higher up Nebula Camera mount for the Ender3V3 Plus, should work on the regular V3 assuming it has the runout sensor. I am not…
z_offset: 2 #if you have a lot of issues try 2.5 x_offset: 33.9 y_offset: 0 need 2 M3 heated inserts and 4 8mm M3 screwss I used demon eddy. will make eddy useful. https://github.com/3DPrintDemon/Demon_Eddy
Loved the original design however found it a bit tight to fit all the cabling into so remixed it. Modified the mount to printer assembly to add some strength. Added M4 headset inserts at all fixing points. M3 screws used to fix mount to…
Two different sized braces to hold the bowden tubes at the correct locations and prevent them getting tangled I have a CoPrint 4 colour setup with the filament on rollers on each side and needed a basic way to manage the tubes to prevent…
Loved the original model so I remixed it to add heated inserts to the carriage and backing plate. There wasn't enough meat around the belt mount to put inserts so these remain as threaded into the plastic. You will also need the locking…
I needed something supportive to hold the cable up and out of the way of moving parts on my Ender 5 Max, as it was catching on things. Prints in two or three parts as desired, and uses three strands of 1.75mm filament to connect them…
This remixed model is used to attach CoPrint's ChromaHead to the Creality Ender-5 Max, and solves issues I had with the print head coming loose with the original model. Shown printed in Flashforge PETG-CF Recommend printing with PETG, but…
Support for 4 extruders for using in elegoo neptune ¾ (plastic frame)
Just add two m4 x 450mm all thread and all of the rest of the stock pieces. In the images I have received the m4 all thread yet. The all thread will go thru the stock holes and bearings.
For use in adapting the Ender 3 V3 CoPrint KCM kits that are available directly from Creality for use with an Ender 5 Max. The kit sold on Creality's website does not include the standard power adapter included in KCM kits directly from…
While CoPrint does provide some basic mounting hardware to attach their CX-1 Extruder Bracket to the Ender 5 Max, it leaves a lot to be desired. It forces you to mount the extruders to the back of the machine, and in situations like mine,…
Another attempt to fit a 5015 radial fan to the CoPrint head. This improves cooling performance significantly and while also being extremely compact. I have a TwoTrees SK1 in which I struggle to maximize the building volume. Mounts to…
This model makes it possible to install ChromaHead on the Ender 5. Can be printed using PETG or PLA.
I just got a Co-Print and recently and installed it on my Anycubic Chiron. The first solution I found ended up reducing my print height by about 120mm. I liked the SV08 Spool and extruder holder idea, but with a 2020 profile it wasn't…
I used 3 x 4.5mm 304 stainless steel Balls, a micro switch, and a JST plug to create a screw on runout filament sensor. Just unscrew 8way filament sensor, put this in place of the collar it connects too. I printed it a 1.0mm layer height…
Homing will use one of the screws used to mount the belts to the carriage. Use a socket head cap screw on the hole AWAY from the pulley on whatever side you home with. Use a low profile button head cap screw on the opposite hole. If…
I designed this simple wallmount to get some sort of better arrangement of the KCM and all the cables on the back of the printer. There are 4 holes meant for threaded inserts (CNCKitchen M3 x 5.7) but double sided tape also does the trick…
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to move the Z endstop up by quite a large distance in order to accommodate the considerably larger Chromahead that…
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to mount the ChromaHead to the printer, and while I was redesigning the head mounting plate I took the opportunity…
As part of our effort to upgrade our TronXY XY100 printer (also sold as an iMakr STARTT) with a Coprint system, we had to find a way to mount the CX1 modules to the printer and none of the existing bracket designs would fit here. This…
My ChromaBox & KCM are connected to an older CR10 S5 and I didn't want to leave them ontop of the box. Instead I wanted to mount them to a Rubbermaid Fasttrack along with the spools. The KCM design is inspired by @LANPartyCEO…
This is a configurable riser/top-hat for the SOVOL SV08 printer. In its basic form, it has four corner pieces (labeled) and four vented panels. The panels include an optional slider to open and close the vents. The optional/replacement…
Co Print ChromaHead, ChromaPad, KCM and ECM provided from the Co Print github https://github.com/coprint/Series-II-Product-Models Why upload them? well I was looking for a model of the ChromaHead, ECM, KCM and CX-1 Extruder to allow for…
I needed a nice mount for CoPrint KCM to be close enough to the extruders that I could use the shorter connector cables and also tidy things up. So I used CoPrint's published CAD file for KCM, quickly put something together, and printed…
holder for Coprint chromapad. mounts to 2020 extrusion using T-nuts. I printed out of PLA, but PETG would probably be better. supports recommended. printed on Creality K2 plus, model is approx 192X224X155mm so plan accordingly.
I designed these mounts so that they could use t-slot nuts to mount onto my Neptune 4 Max. These can be mounted on any slotted rail. I used M5 t-slot nuts and M5-8 bolts.
10% Infill .2 Layer Height Print in PETG Print 2 Pegs from Soarpix's Skadis accessories pack for mounting. Requires use of the CX-Uno Extruder Housing Modification for tighter spacing. Uses aluminum extruder mounts included with coprint…
These brackets allow the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. I made two versions…
I liked the original project and I thank its original creator for this. What this stl gives: 1) Weight reduction: Original carriage weight following the CoPrint tutorial: 169 g This carriage weight: 120g 2) Build plate area back to…
This bracket allows the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. This version is my…
Thanks to Joker from the CoPrint Discord server for providing the measurements to create this version of the braket for the Ender 3 V3. It wasn't easy, but even remotely, we managed to create this perfect STL for your Ender 3 V3. Material…
Print just as you would a normal benchy, just with four different colors. In your slicer you can change the colors to whatever you want in the filament section. The Benchy_2 file adds 4 squares of each color with labels so you know what…
I was looking for a simple solution for my Neptune 4 Max printer, so i create a Model that fits to my setup with CoPrint and TBSTRON3D modifications. CoPrint: - KCM - ChromaHead - 4x CX-1 Extruder TBSTRON3D: - X-axis upgrade guide rail…
