COPRINT spool and extruder mount 2020 extruder clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a modified extruder clip from the "SV08 COPRINT spool and extruder mount" for 2020 extrusions.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I just got a Co-Print and recently and installed it on my Anycubic Chiron. The first solution I found ended up reducing my print height by about 120mm. I liked the SV08 Spool and extruder holder idea, but with a 2020 profile it wasn't going to work. I made this up for myself and hope it'll help others to use this on their 2020 profile printers. You'll need an extra M3 screw(probably 6mm long) and T-nut to properly install this. Any method you use to attach things to your 2020 profiles will I just got a Co-Print and recently and installed it on my Anycubic Chiron. The first solution I found ended up reducing my print height by about 120mm. I liked the SV08 Spool and extruder holder idea, but with a 2020 profile it wasn't going to work. I made this up for myself and hope it'll help others to use this on their 2020 profile printers. You'll need an extra M3 screw(probably 6mm long) and T-nut to properly install this. Any method you use to attach things to your 2020 profiles will work.
The top of the clip is a little thin and can break when removing supports from inside the screw hole if you use supports. But it doesn't ruin the functionality or mountability to the bracket.