COPRINT spool and extruder mount 2020 extruder clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is just a modified extruder clip from the "SV08 COPRINT spool and extruder mount" for 2020 extrusions.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I just got a Co-Print and recently and installed it on my Anycubic Chiron. The first solution I found ended up reducing my print height by about 120mm. I liked the SV08 Spool and extruder holder idea, but with a 2020 profile it wasn't going to work. I made this up for myself and hope it'll help others to use this on their 2020 profile printers. You'll need an extra M3 screw(probably 6mm long) and T-nut to properly install this. Any method you use to attach things to your 2020 profiles will I just got a Co-Print and recently and installed it on my Anycubic Chiron. The first solution I found ended up reducing my print height by about 120mm. I liked the SV08 Spool and extruder holder idea, but with a 2020 profile it wasn't going to work. I made this up for myself and hope it'll help others to use this on their 2020 profile printers. You'll need an extra M3 screw(probably 6mm long) and T-nut to properly install this. Any method you use to attach things to your 2020 profiles will work.
The top of the clip is a little thin and can break when removing supports from inside the screw hole if you use supports. But it doesn't ruin the functionality or mountability to the bracket.