You've Captured My Heart

Let your Valentine know that your heart is theirs by making them a You've Captured My Heart 3D print!

You can set your captured heart on any flat surface or hang it using the ring at the top of the cage.

PLA version:

PETG version:

The You've Captured My Heart can be printed in PLA or PETG and does not require supports.

The provided STEP file includes the cage object, the large heart object, and ten small hearts for the base of the cage; if your printer supports multi-color printing, you can make each of these objects any color you like!

An STL file is also provided.

This design has a 78mm (~3.1") diameter, a 121.4mm (~4.8") height, and takes about 7.5 hours to print in PLA on an Original Prusa MK4 with MMU3 (about 10 hours in PETG), but you can scale it up or down in your Slicer to make it smaller (and print faster) or you can make it even larger if you'd like!

PrusaSlicer 3MF files have been provided for PLA and PETG.

G-code files have been provided for PETG and for PLA for the Original Prusa MK4 with an MMU3.

The PLA version of the You've Captured My Heart print seen in the photos was printed on an Original Prusa MK4 with FilaCube White PLA + FilaCube Red PLA with a 0.4mm nozzle at 0.2mm layer height with a 15% support cubic infill.

The PETG version of the You've Captured My Heart print seen in the photos was printed on an Original Prusa MK4 with Prusament Yellow Gold PETG + Prusament Carmine Red PETG with a 0.4mm nozzle at 0.2mm layer height with a 15% support cubic infill.

Be sure to check out my other designs - including honeycomb storage wall (HSW) accessories, universal key covers, and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso_661446/models