1 / 3
Robo3D R1 Hexagon parts fan shroud — zdjęcie 1
1 / 3

Robo3D R1 Hexagon parts fan shroud

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improves airflow across the Robo's extruder nozzle to improve bridging and overhang performance.

Ocena
0 / 5
Polubienia
2
Pobrania
24
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Improves airflow across the Robo's extruder nozzle to improve bridging and overhang performance. Designed to fit directly on to the current generation R1 with hexagon extruder.

Should be printed with ABS or other materials with a high GT temperature

My original design narrowed right down to blow air only across the nozzle however given the extremely limited space this would choke the fan resulting in pitiful airflow. This more open design blows air across the whole hot end and is much more effective.

Bonus points if you print it with thermochromic material :)

30/01/2015 - Added hot end shield to reduce airflow across the hot end without reducing airflow at the nozzle. Tested with ABS@230°C

29/03/2015 - Reduced the size of the base from 40mm to 38mm

Print instructions

Category: 3D Printer Parts

Tagi