Helldivers Helmet/Skull (display)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helldivers Helmet display for your shelf / setup (12cm high).
- Ocena
- 5 / 5
- Polubienia
- 154
- Pobrania
- 691
- Wydruki
- 5
- Wyświetlenia
- 3139
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
! The model shown in the picture was painted !
Already print-ready. The parts need to be glued together, while the connector helps to find the right position for gluing.The print plate model is a bit tricky to clean up and there will be a seam line down the middle, which you can fill with pollyfilla and coat it with a primer to make it less to none visible.You can also try to slice the raw helmet by tilting it on the chin at an angle, to print the helmet as a whole piece, but the risk of the print failing will be higher.
If you find a better way to slice the helmet without a noticeable seam line, you can share it in the comments.
Recommeded settings:
- 0,08 layer hight / high quality
- tree supports
- seam position: random