Ender 3 Max PSU Relocation MOD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This original design is a really great one but I found that it was pressing against my stepper wiring a bit too tight…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This original design is a really great one but I found that it was pressing against my stepper wiring a bit too tight and there was also limited room to move it around. So I added a top leg with holes that fit perfectly to use M4 x 12 screws with T-Shaped nuts.
I also made another one without holes so you could drill your own holes. The center of the holes will be 10mm from the inside corner.
I would also like to give @DutchShapes a big thank you for creating what I think is the best PSU holder when adding a second Z-screw & stepper motor to your Ender 3 Max.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 Max
**Rafts:**
No
Supports:
Yes
**Resolution:**
.2
Infill:
45%
**Filament:** R3D PETG Black
Notes:
You can also use PLA
Post-Printing =============
Had to drill correct hole placement as I was off the first time. Model now has correct hole placement.
Category: 3D Printer Parts