Ender 3 Max PSU Relocation MOD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This original design is a really great one but I found that it was pressing against my stepper wiring a bit too tight and there was also limited room to move it around. So I added a top leg with holes that fit perfectly to use M4 x 12 screws with T-Shaped nuts.
I also made another one without holes so you could drill your own holes. The center of the holes will be 10mm from the inside corner.
I would also like to give @DutchShapes a big thank you for creating what I think is the best PSU holder when adding a second Z-screw & stepper motor to your Ender 3 Max.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 Max
**Rafts:**
No
Supports:
Yes
**Resolution:**
.2
Infill:
45%
**Filament:** R3D PETG Black
Notes:
You can also use PLA
Post-Printing =============
Had to drill correct hole placement as I was off the first time. Model now has correct hole placement.
Category: 3D Printer Parts