HoverAir X1 ProMax Protective Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X1 ProMax protective rubber boot for field use
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 458
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a, light-weight minimalist protective rubber boot for a HoverAir X1 ProMax. The X1 ProMax is a small folding drone that conveniently slips into a large pocket, so pointless having a large and heavy storage box (as supplied with it) in your rucksack or during active field use. Made from 83 shore TPE, it is 1.5mm thick (but with an extra 1mm protection at the edges). Fill is gyroid 20%, deliberately not solid to provide impact absorption and protect the drone. The top of the boot is open because the top of the drone is effectively a solid side. The boot does come up beyond the drone top surface to give protection. The drone is a ‘slip-fit’ but (as shown) I use a rubber band to keep it in place. Note: the gimbled camera extends to the limits of the folded drone and so there is a deliberate cut-away so that in storage no pressure is placed onto the camera or its mount.
Prints right way up with no support (in practice I have found you get much crisper edges with enforced support at both over-hangs (see pic & included in the BgCode). STL also provided
See also: the version of this boot for the original HoverAir X1
HoverAir X1 Flex Protective Boot | Edit model | Printables.com
see also the protective boot for the HoverAir beacon following the same principles
HoverAirX1 Beacon Cover by Rosti | Download free STL model | Printables.com