Kitchen Door Baking Paper Roll Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable screw-on support for kitchen door baking paper roll. Two versions: single or split for small beds.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 908
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This 3D model is a practical and space-saving screw-on support designed to hold a roll of baking paper on your kitchen door. It’s perfect for keeping your baking paper within easy reach while cooking or baking. The support is sturdy, easy to install, and compatible with most standard kitchen cabinet doors.
The model is available in two versions to suit different 3D printer bed sizes:
Single-Piece Version: For larger print beds, the model is provided as a single piece for seamless printing.
Split Version: For smaller print beds, the model is divided into two parts that can be easily assembled after printing.
Printing Profiles and Tips:
- Material: PLA or PETG is recommended. PETG offers better durability and moisture resistance, making it ideal for kitchen environments.
- Layer Height: 0.2 mm for a balance between speed and detail.
- Infill: 20-30% for a lightweight yet sturdy structure.
- Supports: Not required due to the optimized vertical orientation.
- Orientation: Print vertically to ensure the best layer adhesion and strength. This orientation also minimizes the need for supports and reduces the risk of warping.
- Adhesion: Use a brim (5-10 mm) to improve bed adhesion (if needed). In my test it wasn't necessary.
Assembly Tips (for Split Version):
- Print both parts vertically as per the recommended orientation.
- Clean the joining edges to ensure a smooth fit.
- Use a strong adhesive (e.g., epoxy or super glue) to bond the two halves together. Clamp the pieces until the adhesive sets.
- Reinforce the joint with a small bead of filament using a 3D pen or soldering iron (optional).
Installation:
Position the support on the inside of your kitchen cabinet door.
Mark the screw holes and pre-drill if necessary.
Secure the support using screws. Ensure the screws are tight enough to hold the roll but not so tight as to damage the printed part.
I have others models:
- For Transparent film: https:/https://www.printables.com/model/1180353-support-for-kitchen-door-transparent-film-roll-hol/www.printables.com/model/1180353-support-for-kitchen-door-transparent-film-roll-hol
- For Aluminium foil: https://www.printables.com/model/1171699-support-for-kitchen-door-aluminum-foil-roll-holder
This model is designed to make your kitchen more organized and efficient. Happy printing, and enjoy your baking adventures! 🎉