Alternate Phalange Joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an alternate design for Part 7, the middle phalange, of Will Cogley's Bionic Hand.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Only my original model is included. To build the entire finger the rest of Will's incredible design will need to be downloaded from his shared OnShape account, available to his Patreons.
I split the original PhalangeConstruction model in PrusaSlicer then removed parts 4 and 7, the sides of the middle phalange, and replaced them with my version. One side will need to be mirrored. See photos for a comparison between the original model and my variation.
The first version was a bit tight; I've increased the tolerance by 0.1mm and updated the model. It's working well.