Voron V0/V0.1 Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use these feet, printed in TPU, for your Voron V0 or V0.1 over the stock option.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 209
- Wydruki
- 5
- Wyświetlenia
- 2473
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a different option for my Voron V0.1 feet rather than the standard option. I used V2.4 feet as inspiration and modeled this version to fit the V0 and V0.1. Solid infill sits between the button head and aluminum extrusion; as such, no washer is needed. Use the standard M3 x 40mm button head bolt for installation.
Print Settings:
Layer Height: 0.2 mm
Perimeter: 4
Infill %: 40
Infill Pattern: Grid
Top/Bottom Layer: 4
No supports needed
I used Island TPU Black for this version. You will likely need to adjust your temperatures and settings for your choice of filament.
If you are interested in these for your printer but do not want to deal with printing TPU or do not have that filament available, I offer these for sale on my Etsy shop @ www.etsy.com/dotinkeringllc