1 / 12
X-Shot Pro Fury X Picatinny Stock Point — zdjęcie 1
1 / 12

X-Shot Pro Fury X Picatinny Stock Point

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A low-profile stock attachment point for the Fury X Blaster

Ocena
4,714 / 5
Polubienia
67
Pobrania
434
Wydruki
6
Wyświetlenia
1687
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Fury X Picatinny Stock Attachment Point is a low-profile stock option for the X-Shot Skins Pro Fury X. It replaces the awkward switch-style mag release with a short length of rear Picatinny rail. Designed to use RedCowl's Simple Picatinny Stock upside down, this rear tactical rail is also compatible with select other Picatinny stocks. Additionally, the blaster can still be comfortably used without a stock for closer-quarters battles.

I noticed a lot of hobbyists both: A) didn't care for the primary mag release in the rear, B) felt the need for a proper stock point on the Fury X. While others have come up with designs that wrap around the magwell, and are no doubt sturdier, I thought they were overbuilt and too bulky to fit in with the Fury X's slender aesthetic. Special thanks to Spyder for beta-testing a very early version of this mod when I didn't have a Fury X home with me to test for myself!

FEATURES:
• Fury X Picatinny Stock Attachment Point
• Low-profile stock point for the X-Shot Skins Pro Fury X
• Replaces rear mag release for Picatinny rail
• Easy installation
• Blaster is still comfortable to use without a stock!
• Pairs well with RedCowl's 3D-printed stock*
• Compatible with select other Picatinny Stocks

*The most comfortable and durable configuration I've found is with the RedCowl stock installed upside-down. There is an additional lever force when the stock is installed right side up.  

FILES INCLUDED:
• 1 Picatinny Rail
• 1 Internal Cleat

RECOMMENDED PRINT SETTINGS:
• For optimal part strength, print the rail part vertically
• Quality: No scarf seams or joints
• Strength: At least 5 wall loops
• Supports: Enabled; normal (auto); 1.25mm x/y/z support distance
• Others: Outer brim on the Rail for better bed adhesion

HARDWARE NEEDED:
Hardware Kit Wishlist
• 1 M3 x 12mm Socket Head Machine Screws
• 1 M3 Hex Nut

LINKS:
• X-Shot Pro Fury X
• RedCowl Picatinny Stock
• Fury X Flared Magwell
• More Fury X Mod Designs

Tagi