Ski and Snowboard Service Vise
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ski and Snowboard Service Vise to clamp in Workbench
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have 2 Workbenches where you can already clamp in something, but the Service Vises I found out there were to be mounted with additional clamps, so I decided to desing my own. I gave some extra space for the ski and snowboard cut-outs, because I had some left over rubber band to mount on each of the sides.
The cut out for the ski is 35mm and for the board 30mm.
I used strong 3M assembly tape to get the rubber band attached.
The 3mf model has some brim added, because I had some serious warping on the first try (maybe in the garage it was a bit too cold). With the brim it came out well.
Top, bottom and side walls I configured 6 layers and used 0.2mm “Strength” setting from Bamboo lab with gyroid infill @ 25%.
It appears to be really strong and won't break easily.