Ski and Snowboard Service Vise
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ski and Snowboard Service Vise to clamp in Workbench
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 548
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have 2 Workbenches where you can already clamp in something, but the Service Vises I found out there were to be mounted with additional clamps, so I decided to desing my own. I gave some extra space for the ski and snowboard cut-outs, because I had some left over rubber band to mount on each of the sides.
The cut out for the ski is 35mm and for the board 30mm.
I used strong 3M assembly tape to get the rubber band attached.
The 3mf model has some brim added, because I had some serious warping on the first try (maybe in the garage it was a bit too cold). With the brim it came out well.
Top, bottom and side walls I configured 6 layers and used 0.2mm “Strength” setting from Bamboo lab with gyroid infill @ 25%.
It appears to be really strong and won't break easily.