Counting matching models…
Intro Bring the slopes to your fingertips with this Mini Finger Snowboard – a fun 3D printable fidget toy that lets you perform tricks, slides, and spins right on your desk or anywhere you like. Inspired by winter snowboarding and…
V případě potřeby můžete změnit velikost v kraji. @Grip se velmi dobře drží. Po roce používání se nic nerozbilo. Vytištěno z PETG na základní nastavení. Nepřidal jsem žádné obvody. Lepené univerzálním silným lepidlem.
V případě potřeby můžete změnit velikost v kráječi. @Grip se velmi dobře drží. Po roce používání se nic nerozbilo. Vytištěno z PETG na základní nastavení. Nepřidal jsem žádné obvody. Lepené univerzálním silným lepidlem.
[GERMAN] Hallo zusammen, nach der Suche nach einem guten Schleiftool für Snowboards ist letztlich ein eigenes Tool entstanden, um den Anforderungen von Ski und Snowboards gerecht zu werden. Dies sind beim Snowboard vor allem die…
snowboard beer holder, holds three stubby cans for when your on the mountain. printed in TPU 95 and requires 3M double sided tape and a quick pull strap (will link below) i used this daily in Avoriaz France with no affect on the board…
Pro kamaráda jsem vyrobil uchycení pásků ke staršímu snowboardu. I made a strap mount for an older snowboard for a friend.
This Snowboard Stomp Pad is a 3D-printable traction pad designed to improve grip and control when riding with one foot unstrapped. It helps keep your boot securely in place while skating, getting off the lift, or riding flat sections. The…
It is used to slide onto the bottom edge of the snowboard during fastening to prevent slipping. After fastening, simply remove the brake and put it in your pocket. Printed from PETG Layer height 0.2 I recommend printing upright using a brim
Tune your edges! These file holders allow you to tune your edge like a pro. Instructions on tuning below. I included file holders to tune your edges to 89° (most common), 88.5, 88 and 87 (super aggressive). Printing in super cheap PLA…
For those who love the snow (and 3d-printing): The mini 13 snowboard! It connects to the ankles, so I would recommend printing in the same color as the armor. Now you an have your mini 13 slay the gnar! Enjoy! (:
finger snowboard that fits most fingers. original model https://www.printables.com/@GlennovitS3D
Ski & Snowboard Drink Holder – Stay Hydrated and Cool on the Slopes! Take your favorite beverage wherever you go—on skis, snowboard, or any gear! This versatile drink holder attaches easily with strong adhesive tape or glue. Position it…
I wanted bindings with the newer model toe strap that goes over the toe cap instead of the old-school over the foot type. Have been using these for two winters now, haven't failed me yet! Printed in A95 shore TPU.
Designer notes: I made this to be printed with TPU, but it can also be made with PLA. Both work well in my testing, but I liked TPU better because it gripped my rubber-soled boots more. With TPU, a lower infill (25%) will allow it to flex…
I made this little scrapper because I couldn't find my real ones when i was waxing my board, I updated the modle after printing so the edges of the cutout are rounded to remove the fear of them scratching the base. Printed on a Prusa Mk4…
Stop slipping off while exiting chairlifts and looking like a doofus. Also helps prevent unnecessary injuries that often happen at chairlifts. Secure with 3M VHB tape that resistant to cold and suitable for “outdoor” use. I used 3 of…
Description This snowboard binding hook mounts to your rear binding to make skating and unloading ski lifts easier and more controlled. It provides a convenient contact point to lift or guide the board when your back foot is not fully…
Just add two counterbored screws and screw them into a wall stud to securely mount. Able to display both skis or a snowboard. Semi-circular slots added for ski poles to be mounted as well.
Don't want to print? Buy from me directly! >>> Craftedcarving.com Tune your snowboard/skis at home with these clamps! 2" or 3" Clearance for all tables/workbenches Mostly 3D printed: PETG/ABS, TPU Non-Printed Items: ¼-20 Threaded Rod…
Enhance your snowboard with this unique 3D printed Amanita muscaria stomp pad! Don‘t have a printer? Check out my Etsy Shop or buy it from me directly ! Designed for both style and function, it provides superior grip for better board…
Printed with PLA and a 0.16mm Layer Height. Infill of 50%, less would probably work too. No supports needed.
Inspired by Zeyrox's design (https://www.printables.com/model/1014151-minimalistic-snowboard-mount/files). Uses 3m double sided adhesive to mount (similar to what you'd find on the back of a commandstrip) instead of screws. There is about…
I desing several models: If you just make 1 board print the normal one for matching ankles with dummy 1.0 o dummy Beta, this need suports in the front and back. If you need to print several boards or want better finishing, print the…
I designed this part to be a direct replacement for the FLAD (Forward Lean Angle) Cube on my BentMetal Snowboard Bindings. My adjustment block broke midseason and couldn't find / didn't want to wait for replacement so I made this replica…
Put your pride on the wall, let everyone see that you are a snowboarder! :)
A simple wall mount for snowboards. Should fit most boards up to around 12 mm in thickness. Make sure to use a strong material and adjust your print settings for maximum strength. Don't use in a place where someone could get hurt if the…
Intro Bring the slopes to your fingertips with this Mini Finger Snowboard – a fun 3D printable fidget toy that lets you perform tricks, slides, and spins right on your desk or anywhere you like. Inspired by winter snowboarding and…
Product Description for a 3D-Printed Snowboarding Benchy Take your 3D printing adventures to new heights—literally! Introducing the Snowboarding Benchy , a fun and dynamic model of the beloved 3D printing mascot shredding down a…
Small Snowboard. I made this for a craft project my wife made. She crafted some wool figurines and I made some chairlift chairs and this snowboard for her. This can also be used as a finger snowboard I made this with PLA. Dip the ends in…
This is a fun snowboard to keep the shred going wherever you are. This is a print in place model with rotating bindings. You might be able to scale it up and down, depending on finger size. The bindings become a little sticky after a…
Elevate your ride with our herb-inspired snowboard stomp pad! Designed for riders who appreciate both style and substance on the slopes. 🏂 Key Features: • Eye-catching cannabis leaf design • Ultra-sharp 3D printed texture for superior…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D 3D Printable Snowboard Finger Toy Bring the slopes to your desk with this mini snowboard finger toy! Featuring a realistic design and curved…
V případě potřeby můžete změnit velikost v kraji. @Grip se velmi dobře drží. Po roce používání se nic nerozbilo. Vytištěno z PETG na základní nastavení. Nepřidal jsem žádné obvody. Lepené univerzálním silným lepidlem.
V případě potřeby můžete změnit velikost v kráječi. @Grip se velmi dobře drží. Po roce používání se nic nerozbilo. Vytištěno z PETG na základní nastavení. Nepřidal jsem žádné obvody. Lepené univerzálním silným lepidlem.
You can change the size in the slicer if you need to. The grip holds very well. After a year of use, nothing has broken off. Printed from PETG on the basic settings. I did not add any perimeters. Glued using universal strong glue.
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D 3D Printable Skis and Snowboard Rack Organize your mini winter gear with this stylish skis and snowboard rack! Designed to resemble a rustic…
This is a basic wall mount to store ski's and snowboards vertically. Designed to be simple to print, use minimal filament with no supports, and work with any board or skis. All of the existing mounts I could find are only rigid plastic,…
I couldn't find any info on this tool online, so I thought I'd post it here. This model was not made by me, but created by u/Fhhk on Reddit per request. It will be extremely small when putting it into printing software, so you may need to…
a hitch mounted ski/board rack that mounts in a hitch for hardware you will need 2 hex head bolts: 1 ½-6 tpi one at 2.5 inches long, and one at 10 inches long, as well as a matching tap the files marked as padding can be made as anything,…
A small tool to help setup you boot centered over the board, simply mount your bindings as normal and check toes and heel sides are even, the lines on the base are in 2mm increments. Comes apart so and fits in your pocket or tool kit. The…
Stand for Snowboard vise. Need to buy M8 threaded inserts to heat sink into the piece. Knobs and caps not included.
Brúska na hrany snowboardu, lyží. Diamantový nastavec má roymer 770x25x4.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA starter Rosa 3D Black Transmission Distance: 0.3 PLA+ Sunlu White Transmission Distance: 5 This print uses 2 unique filaments Swap…
26 Feb 2025 NOTE: my son tested this in Winter Park Colorado and said it works. “Didn’t have to sit down once” “Die Bremsklampe”, made at my son’s request, is a temporary device to slip on the center, downhill, edge of a snowboard to help…
Something to carry all my snowboarding equipment in one hand.
I wanted to hang up my board horizontal so I designed some mounts. The only thing else you need is a drill and some screws. Should fit every twin shape board with camber. Enjoy it! -printed with PLA -0.2 layer height -30% Infill for…
Winter has just started, and you're dreaming of first chair and itching to scan your Ikon or Epic pass. But wait, you dismounted your bindings, your edges are dull, and you need a fresh wax! You don't want to shell out $300 to get them…
Enhance your daydreams of carving epic lines on a mountain peak with this finger snowboard! Ready to hit the slopes? Download the files today! Design Notes: As uploaded, these are designed to fit most adult fingers, scale up or down as…
Here's the next in my snowboarding animals series, the Snowboarding Lion. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey…
Another in my snowboarding animals series - Snowboarding Raccoon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Grey…
I designed this model for reusing my first snowboard as vertical wall hanger for clothes or jacket. Bill of material : Wall part : 2 Snowboard part : 2 Snowboard screws (M6) : 8 M3 nuts : 4 M3x20 countersunk screws : 4 4 M3 Molly ankle…
Support my small business! Purchased printed stomp pads here! → Crafted Carving Keep Your Ride Fresh with Our Aloe-Inspired Snowboard Stomp Pad! Designed for riders who appreciate both function and style, this stomp pad brings a natural…
My strap broke and replacements cost as much as half a spool of expensive filament so i designed a copy. PRINT AT 100% infill (Unless you know better) MATERIAL: I recommend using TPU for this print - its the closest to the original…
I have 2 Workbenches where you can already clamp in something, but the Service Vises I found out there were to be mounted with additional clamps, so I decided to desing my own. I gave some extra space for the ski and snowboard cut-outs,…
Lace handle for boots, I make it with ASA plastic, but you can use PLA, PETG or ABS. But print with minimum infill of 60%.
Do you struggle scraping wax off your Skis/Snowboard? Well look no further, I introduce you to the WaxAway, the 3D printed wax scraper. It takes ~1 hour to print and fits on all 3D printers. Each side is flat, allowing you to add your own…
A snowboard to sled conversion mount. Requires at least 4 M6 25mm fasteners and some paracord, all of which you should be able to get from Home Depot or Lowes. I printed with PETG and 25% infill, and it held up fine. I don't think I'd…
A Case for Tracking My Snowboard Tracking my snowboard is essential for several reasons: 1. ** Theft Prevention ** : Snowboards are valuable and can easily be stolen. A tracking device offers peace of mind, allowing me to quickly locate…
This is fully 3D-printable solution offers enhanced stability and grip strength. Added mounting platform and a robust clamp ensures that your snowboard is securely fastened, providing confidence and control during use. I use this…
The model fits small to medium fingers but it is easy to change the size. you can leave the board flat or use a heat gun to bend up the nose and tail.
Wrench tool to remove the magnetic ski rack from the car without damaging your fingers. I made it in PLA, but I recommend doing it with a more resistant material like ASA which I leave the gcode. Herramienta llave para desmontar el…
NEW Version available! The model is printed in PETG with 5 line wall, top and bottom. It results in a strong build and can be used with any lamp or bench vice at home. It's really useful, especially at the end of the season to keep your…
Highly functional 3D model of a ski/snowboard service vise, perfect for quick and easy servicing of your board. Key Features: Easy to print with no support needed The glide circle moves freely after installing the screw Versatile design…
This model was scaled for my cousin on my younger size so you might need to scale up the model for your fingers to fit. To print you shouldn't need supports or a brim but the supports could help.
Again, DO NOT STEAL! This has not happened yet, but I put effort into these models, and I don't want other people taking all of the credit. (obviously) There are two models, DON'T PICK THE WRONG ONE!!! One is made to put a washer/magnet…
Easy wall mount for your snowboard if you want to show bottom of the board. How to mount this is shown in the pictures, i think its self-explanatory. I printed this with 4 walls, 0.2mm but i think now that overkill. Because of this wall…
Made the original model a bit slimmer, mainly for aesthetics, I preferred it to be a more slim design. Kept the length the same to allow for decent support of the board. Printed 10 of them without issue, used them on a slanted ceiling for…
For this remix, I elected to move the bottom screw hole to the center of the "ball." This allows most of the stress of the snowboard weight to be on the screw, rather than relying on the 3d printed layers to hold together. Just gives me…
[GERMAN] Hallo zusammen, nach der Suche nach einem guten Schleiftool für Snowboards ist letztlich ein eigenes Tool entstanden, um den Anforderungen von Ski und Snowboards gerecht zu werden. Dies sind beim Snowboard vor allem die…
Daniel Ricciardo stomp pad. Approx measurements are 161x92x6.5mm. I did a color change at 4mm to switch from orange to blue to give the overlay look and define the #3 better. The stomp pad itself has traction from the lines in the 3, and…
Für jeden Snowboardfan ein muss. leicht zu drucken trotz Stützstrukturen
The two Holders make it minimal and quick to take the snowboard and put it to rest to furnish your home with style. Printed using Prusament Petg Black and Orange Petg Layer Height: 0.15 Quality No Supports! 100% Infill to be strong!…
Snowboard Garden Gnome – Shred the Gnar, Gnome Style! 🏂❄ Meet the chillest little ripper on the slopes – the Snowboard Garden Gnome ! Whether he's catching fresh powder or just chilling in your garden, this frosty-bearded legend brings…
hold the top of a snowboard so the weight of the binding doesn't put too much horizontal stress on the lower mounts these are remixed from. might require light sanding also works with skis and should sit flush with the bottom mount on…
The toe slider on my bindings broke, and because it's an older board made by 5150, I wasn't able to find a replacement. So, I used the still good one and modeled it up. It's a piece that doesn't undergo too much stress from bending, so 3D…
3° Canting für Clew freedom 1.0 Auf den board sind sie als Goofy Montiert,
Invisible snowboard wall mount Printed in PETG for strength and low speed. The gap fit is 0.2mm, it works for me on my ender 3. I will upload a 0.1mm version. Instructions: Step 1- measure board placement with tape and mark. Step 2- place…
Mount a bottle cage to your snowboard. Only works if you have exposed binding mounting holes. Need a bottle cage? Here's one for a can of beer Or a parameterised one for a bicycle drink bottle Requires M6 bolts to mount to your snowboard.…
Locks onto snowboard bindings to prevent them from being undone. Replaces the USB part in USB Flash Drive Cryptex v2 . Won't stop a determined thief but will stop someone from picking up your board and walking off with it. Print Settings…
Adapts Freestyle bindings to old 3d bolt design. Print at 100% infill.
Place the hook under a ski/snowboard binding and attach the binding to the hook with a strong rubber band. Assembly is the same as the original model. The hook is more of a prototype. It works, but it could be smaller, thus consuming less…
Ho creato una scultura che rappresenta il grinch che fa snowboarding
Printed it with PLA and it turned out quite good. Fusion 360 file is included so that one can put a custom inscription on it.
if you print this also print the snowboard on my profile to go with it!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A Snowboard Binding that i make, this is only the version 1.0, will be improved.
