1 / 15
Wakeboard Snowboard wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hooks with different angles and shapes for hanging waterboards and snowboards on the wall
- Rating
- 0 / 5
- Likes
- 68
- Downloads
- 454
- Makes
- 2
- Views
- 2,205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you print a Rocker hook then the second hook must be mirrored.
Resolution: 0.2 mm
Wall loops: 5° hook 5-loops / 30° hook 10-loops
Infill: 5° hook 20% / 30° hook ~40% but more is better
Material: PLA , PETG
Supports: No
Brim No
Screw hole
Diameter : 5.2mm, 0.2 inch
Hole Length :
Hook D1 - 28mm, 1.10 inch
Hook D2 - 25mm, 0.98 inch
Hook D3 - 15mm, 0.59 inch
Hook D4 - 13mm, 0.51 inch