Vehicle Protecting Ski and Snowboard Strips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print magnets onto the side of a vehicle, providing a safe place to lean several pairs of skis, or two snowboards.
- Rating
- 4 / 5
- Likes
- 38
- Downloads
- 140
- Makes
- 1
- Views
- 1,330
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Noncommercial
A printable protector for your vehicle, so you can safely lean skis and snowboards against it. Requires 10x4x2 rectangular neodymium magnets (6 per print, and the prints lock together as a pair, so 12 magnets per completed unit).
Note: This model was designed to be printed in TPU. I've been really happy with my results in NinjaTek Cheetah, but for the more budget conscious folks, Sainsmart TPU should be fine too. Anything with a roughly 95A shore hardness will likely work fine.
I've tested leaving this on the side of my Toyota Tacoma traveling hundreds of miles at 80 MPH, and it stayed put just great. :-)