Titanium Trap ••• crab, minnow, shrimp, bait
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Simple yet effective trap suitable for capturing shrimp, crawfish, minnow, and other creatures.
Free, open-source, parametric; designed using ShapeScript.
Features
Corrosion-free (leaves no rust marks on your boat);
No electrolysis next to other titanium parts (shackles, rings, etc);
Light and strong;
How it works
The entrance is small;
A creature gets in;
The creature is stupid;
The creature can’t find its way out;
The creature gets trapped;
Parts
4 × titanium grills
40 × strong zip ties (16 per entrance, 8 to hold the walls together)
1 × glow-in-the-dark tag (optional)
Printing
100% infill TPU for entrances is the way to go. Bonus points for transparent filament. Heads up: long print, takes about 12 hours per side.
Assembly
Use good zip ties to tie everything together (never underestimate how strong crabs can be). Ideally, the four BBQ grills need to be welded together. Zip ties will eventually get broken (again, crabs are very strong), so using lots of fishing line instead is not a bad idea, but it's much more time-consuming.
Hint: Tie the glowing tag (or bait container) in the center of the trap — this way it ensures visibility and won't be reachable from the outside.