P
PrintablesJamesR5D4
Flexible strap / hinge - TPU
Part of my strap designing, I had the idea of this being printed in TPU. It worked great as a 'hinge' to keep a storage box from getting misplaced.
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
Wyniki wyszukiwania: trap
Liczymy pasujące modele…
P
PrintablesCriticalLayer3D
One Handed Adapter Joystick Stabilizer Bowl (Leg Strap mount or Desk Mount)
For the leg mounted stabilizer bowl, use any one inch nylon velcro strap. Here is a link to one below: https://www.amazon.com/dp/B0B567TCHF If you would like me to print one for you, check out these links:…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Backpack Strap Hook V2
About the model: This is a hook I designed to fit on the end of a backpack strap as part of a sewing project. The key innovation for this V2 design was to make it removable, i.e. you can add and remove it from a loop without needing to…
P
Printables
Tiger Brand Rat Trap Mod
Similar to “The Bait Cave” by maikeru, this is designed to increase the efficiency of a rat trap, in particular the Australian Made, Tiger Brand, Wooden Heavy Duty rat trap. Pretty easy to install with a couple, or four small wood screws.…
P
Printables
Tension Buckle for 38mm Straps - Source Files Included
Heavy duty buckle used to level up my laptop bag with a more industrial look. The buckle is super strong, easy to install on an existing bag without the need to sew. I'm using it on my daily laptop bag and it works well. Straps are easy…
P
Printables
Samsung Galaxy Watch Ultra strap holder
The Galaxy Watch Ultra introduced a new style of watch straps. This model is a wall-mounted holder, designed to be the correct width to fit 1 or 2 normal sized 3M Velcro Command Strips for non-destructive mounting on a wall. You can also…
P
Printables
3M respirator straps clips
Loose ends in respirators can be annoying. Apart from this they can be very dangerous when used with rotary or other power tools. This print allows to keep the ends fixed. Wider clips attach to the lower strap, narrower ones to the top…
P
Printables
Amiga 500 TrapDoor switch
Amiga 500 Trapdoor 2 switch for 1Mo chip Ram. Mini Interrupteur à Bascule: https://www.amazon.fr/dp/B0BTM3WQXN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 M3 Vis:…
P
Printables
Tie down strap holder
I remixed this tie down/ratchet strap organizer. 1) removed the rubber band holes and instead added a slot for some hook & loop straps I had. 2) I made it longer to handle the straps I was using. 3) I totally redid this model. I…
P
Printables
Insect GlassTrap
preferibile stampare la “scatola” in verticale con supporto dal piatto ( la feritoia verso l'alto ). appoggiate sopra un bicchiere e chiudete lo sportellino intrappolando l'insetto
P
Printables
Wrist watch strap retainer clip
v2: wider top to prevent accidental unfastening This clip is both small and large enough not to fall out of the watch holes during everyday use. Very simple flat printing with normal supports is pure pleasure. Enjoy! If you would like to…
P
Printables
Quest 3 AMVR Headstrap clip (for 6mm cable)
A little thicker than the original as well. Category: Toys & Games
P
Printables
Fly trap for water cooler bottles
I'd printed a few other fly trap models, such as the ones designed for a soft drink bottle. While they work pretty well, they all had the same problem: they're not big enough! I live in a rural area where the flies can get pretty crazy,…
P
Printables
WTFilament Strap
Strap to attach molle/pals pouches to belt, plate carrier, bag, etc. TPU or other flexible materials recommended. Currently I have only modeled the short version which is for pouches using 2 rows of webbing. Long version (3 rows) coming…
P
Printables
Scale Model of Thermo Fisher Orbitrap Astral MS
Scale Model of Thermo Fisher Orbitrap Astral MS
P
Printables
Molle GoPro Strap Mount - Closed Strap Mount
GoPro mount for backpacks. This particular design was made on request, it has a closed strap mount. There are two models Landscape and Portrait that rotate the orientation of the mount. The name is for identification mostly, it takes the…
P
Printables
DJI Mic Mini magent mount on helmet strap
Build of material: 12mmx12mmx3mm N52 magnet Pause on layer 70, insert the magnet then resume. (please see my ocraslicer 3mf file)
P
Printables
Bottle Fly Trap for Mason Jars
Fill 1/3 of the jar with water and a add a scrap of raw fish or raw meat. Screw the cone or tubes part in with the lid ring, them pop the top cover into the four small holes. Within a few days, as the meat decomposes, the flies will start…
P
Printables
Skyzone Cobra 2s battery strap mount
This is a 2S battery setup for my Skyzone Cobra FPV goggles. I've mounted it to the back of the standard head strap, which I've found to be the most comfortable arrangement. The battery case is designed with a groove for easy attachment.…
P
Printables
Ashtrap - The Over-Engineered Ash Tray
This model is pretty self explanatory. Give the side a few taps to force ash to fall down into the infill trap. Increasing infill density will trap the ash better but be harder to shake the ash down into. Must be printed with no top…
P
Printables
Creality K1 & K1c Door Hinges Geared Print in Place - Top hinge trap 2mm
I had the problem on the K1C of the tool head opening the door when homing, I don't wanted to cut the stock top hinge so I printed this piece 100% infill using ASA CF see original:…
P
Printables
The bracket for securing the strap of swimming goggles.
The bracket for securing the strap of swimming goggles is a small but essential component designed to hold the strap in place, ensuring a snug and adjustable fit. It helps maintain a secure seal between the goggles and the swimmer’s face,…
P
Printables
Thin Flexible Watch Strap for Pebble Steel
Before Printing: Make sure you've got a buckle to attach! You can repurpose one from your existing strap, it likely uses a spring bar. Use a spring bar tool to easily remove it. (the Pebble Steel's strap width is 22mm) Print two strap…
P
Printables
Sticky Trap Tape Strip Holder Stand V2
Something to hold a sticky trap tape on a flat surface. Base with corner holes and two extra centered holes for pushpins.
P
Printables
Lens Cap Holder for Camera Strap
This is a simple holder for lens caps. Now, you don't have to worry about losing or misplacing your lens covers while on the go. This 3D printable model will keep them safe, secure, and easily accessible. It is a very simple and quick…
P
Printables
Low shake-out ant trap
Ant trap designed to low shake-out probability due pet safety. Can be poked down to reduce the movement (kickover) more. Cca. 7cm diameter. Screw-on cap. Added flat bottom version too. Print without support - bridging needed. Poison sign…
P
Printables
Adjustable glasses strap
Adjustable 3D-Printed Glasses Retainer Choose either the large or small attachment model. The small one is designed for very small glasses, while the large is better suited for most glasses. Never lose your glasses again — this…
P
Printables
Elastic strap
A sleek and simple yet elegante elastic strap card/money holder that can be screwed onto the back of the phone with ease.
P
Printables
Ω-series Trapezoidal Drawer Pulls & Knobs (Threaded Insert version)
No supports needed. I have opted to use a Diamond-style 3D effect plate with a Hilbert-curve for first layer for extra fanciness. There are 4 “styles” to choose in 3 “sizes” Styles Knobs (one insert, relatively narrow) Pull (two inserts,…
P
Printables
FPV Drone Battery Strap Float Buoy
This battery strap mounted floaty was created for a GEPRC Cinelog 30 v3 but may fit other drones too! It's been tested with up to 350grams of weight. Required Materials: A 2" diameter x 6" long styrofoam cylinder -…
P
Printables
Mite Trap - Milbenfalle
I needed a might trap for my new coop and designed it as a single unit for easier installation. I printed this part with ABS, but PETG or even PLA will be probably be fine. Hole for perch: 8mm (approx. 5/16 inch) Screw for mounting:…
P
Printables
Dirt Trap 120mm - Sieve for rain barrel - rain water filter mesh
A protection for rain barrels to prevent dirt from getting into the rain barrel. Designed for 120mm Diameter holes. Dimensions: bottom / sieve: 119,5mm overhang: 135,5mm height: 10mm Supports needed. It is recommended to print with ASA.…
P
Printables
Joy-Con 2 Wrist Strap - Holder
This 3D-printed holder is designed to securely store the two Joy-Con 2 wrist straps (also known as skates) that come with the console. It mounts firmly onto the Switch dock, keeping the straps in place without blocking any critical air…
P
Printables
Capra Straps
Printing Instructions: All of these straps are optimized for 95a shore hardness TPU The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count…
P
Printables
Bug a salt type gun lid strap
This is a strap to keep the lid closed on the aliexpress bug a salt gun. I wanted a solution that didn't require dismantling the gun or additional hardware so here's my simple solution. Necessary to be printed in tpu for flexibility. All…
P
Printables
18mm to 20mm NATO Strap Adaptor
Print at .25mm or below layer height. PETG or TPU preferably for longevity.
P
Printables
Switch 2 Joy Con Strap Wall Mount
I remixed this and turned it into a wall mount. The wall connectors are the right size for standard command strips. Infill - 10% Supports - Build Plate
P
Printables
Gyroscopic can holder with a handle and a belt strap holder
Print it with this setting: 0.2mm height without supports sepreate it into parts Print in Place
P
Printables
Playstation VR 2 PSVR2 Deluxe Audio Strap DAS Adapter "Bunny Ears"
Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the…
P
Printables
Stokke Tripp Trapp Sicherheitsgurt Halterung | seatbelt bracket
Halterungen um den 5-Punkt-Sicherheitsgurt von Stokke am Tripp Trapp befestigen zu können. Montage erfolgt wie beim Original. Wurde 3D-Druck-freundlich konstruiert: Möglichst wenig Überhänge und integrierte Supports. Gedruckt mit vier Top…
P
Printables
amazefit helio biceps strap
Make sure your printer is well calibrated and be a little gentle when pressing in the amazefit core for the first time. Needs a 22mm elastic band. You can pick either of the buckles. Printed in PETG with supports for the rounded overhangs.
P
Printables
Cosplay Strap Mount Weldable
Cosplay strap mount. I designed this as a firm mounting point to my suit. I sewed the strap/elastic to the mount. Then carefully heated up the base and molded it to where I wanted to mount it. Then I welded it in place for a strong…
P
Printables
Disney MagicBand+ Puck Charging Strap
I use a Magicband+ Puck Watch Band Holder . When I take the puck out of the holder to charge it, I need a way to secure it to the charger. This band does the job! You need to use a flexible filament. I used Overture TPU, and I'm really…
P
Printables
Nikon Strap Accessory Clip V6 for the Nikon GP-1 GPS unit
I recently purchased a GPS for my nikon camera, and it did not come with the strap mount, so I designed my own.
P
Printables
Redmi smart band 2 strap button
Replacement for lost strap button for the redmi band 2. Printed with PLA+ at 0.1 layer height and 5 walls. Print angled (last image) and very slow with a brim.
P
Printables
Light Trap - Lichtfalle for Homebox (Ø 295/245mm)
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl I designed this special light trap for someone in my community, but I didn't…
P
Printables
Kaldewei Shower Hair Trap
This is a hair trap for Kaldewei Showers. Best printed in 0.2 or 0.15 mm layer heights with supports activated.
P
Printables
Model of Marcel Duchamp's Trebuchet (Trap)
This model is one of the collection Prêt à Faire: Printable Readymade Models If you're an advanced modeler who would like a set of non-textured elements to experiment with, this version is available through my Club: 1 | Concept &…
P
Printables
Backpack Strap Holder
Holder for straps from backpacks, satchels, sport bags or else.This one is designed for straps with a wide of 2,5cm. The model is scalabe and I might add some other sizes if needed!
P
Printables
Stronger Kayoumini TPU Battery Straps + Cable holder + Balance Plug holder
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
P
Printables
v1.3 "HYBRID_TRAP" & v1.0 "THE TRAP" lichtfalle lighttrap
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl changelog: 22.05.2026 - added "hybrid-trap" for " v1.3 the connector " & "…
P
Printables
Corner Strap Clamp Jig
Place one Corner Strap Clamp Jig on each corner of a box or frame you are wanting to pull together and tighten it up with a ratchet strap. Print on the flat side with supports touching buildplate. %15 infill is fine no brim or raft needed.
P
Printables
Positive grid Spark Link Guitar Strap Holster
REGISTERED DESIGN - No. 6495342 Positive Grid Spark Link Guitar Strap Holster 3d Printed Spark Link Guitar strap holster to use if you do not wish to connect the Spark Link directly to your guitar. One size should fit most straps. Make…
P
Printables
Leather Strap Cutter (Imperial Remix)
Simple remix of mirabatek's Leather Strap cutter with measurements in Imperial rather than Metric
P
Printables
FRUIT FLY Trap for Cola or Water Bottle with Rain Protector - NO SUPPORTS NEEDED
Fruit Fly Trap for thread on standard Soda Bottle or Water Bottle with rain protector and hanging hook holes NO SUPPORTS REQUIRED Print in Yellow which helps to attract the fruit fly. (Not White - Fruit Fly dislike White) 75mm x 75mm x 68mm
P
Printables
TwisTrapp - Magnetic grip for Twistshake plates
Does your Twistshake plate refuse to stay put on the Stokke Tripp Trapp tray because of its textured surface? Meet the TwistTrapp - a smart, magnetic adapter that locks your baby’s plate firmly in place, no suction needed. What It Does…
P
Printables
Parametric TPU strap / ribbon (Fusion .f3d file)
Parametric Fusion file to create custom size TPU strap/ribbon sizes See this listing for sample sizes and more info: https://www.printables.com/model/1452926-tpu-straps-ribbons
P
Printables
TrayDock for Stokke Tripp Trapp
Tired of not knowing where to put your Stokke Tripp Trapp tray when it’s not in use? Meet the TrayDock for Tripp Trapp — a pair of smart, spring-loaded clips that let you neatly store the tray behind the chair’s backrest, always within…
P
Printables
Magnetic Bucket Mouse Trap
This model is designed to catch mice effectively and continually for areas like sheds or garages where there are many mice. It boasts a weight configurable counter ballast, magnetic coupling, and a number of small enhancements that…
P
Printables
Helmet strap repair
A spare part for your helmet, whether the original broke or you just want a fresh replacement. I recommend using ASA or a similar material. If those aren't available, use PETG as a bare minimum.
P
Printables
Modular Ski Strap
🏔 Modular Ski Strap A 3D-printable ski strap concept — designed around Titan Straps, M3 hardware, and standard heat-set inserts. Built to handle cold, abuse, and all while being easily repairable. Print it, bolt it, strap it — and you’re…
P
Printables
Chest Strap Rail Clip
This thing replaces a lost buckle on my vaude varyd 22. It attaches the chest strap with 15 mm webbing to the rail guide for vertical adjustement. It should also work for other backpacks with the same adjustment system. Category:…
P
Printables
Headphone Headband with Vision Pro Knit Strap
update v2: ear cups holder updated, print in one piece no need assembly. I made a custom headband for over-ear headphones (I did these for the omega dms open-source headphones) using an Apple Vision Pro knit band, a set of thin blank…
P
Printables
Surgical Mask Strap Holder
This is a holder for the surgical mask straps designed by Surakey. It can be attached by a medium sized command strip.
P
Printables
MattHub Case Mount with Lid for Bigscreen Beyond Audio Strap
This is a remake of the MattHub mount for the Bigscreen Beyond audio strap. The mount backplate is nearly identical to the one bundled with the hub, but my remake features 1.85mm holes instead of 2mm for a stronger fit with undersized…
P
Printables
PSVR2 Replacement Facial Interface with optional integrated top-strap
Summary: A lightweight, super thin, replacement facial interface for the PSVR2. The design is as close to the lenses as is possible, Every user can achieve the max FOV possible. Weight: 28 grams vs 62g on the lonny-k model (including…
P
Printables
Amazfit Bip 5 Replacement Strap TPU
A quick replacement strap I modeled up after my existing ones broke. It needs to be printed in TPU. So far, only the adjustment strap has been remade, but the other hook side is coming very soon. For both straps, you need to pause the…
P
Printables
Guitar strap pick holder
CALLING EVERYONE WHO PLAYS THE GUITAR,YOU NEED THIS!!! no need to worry about the embarrassment of dropping your pick! slides effortlessly onto your guitar strap and holds you picks snuggly. only takes 15 minuets to print and uses only 4…
P
Printables
2.0 Springtrap 13
Hello, this is my second attempt at Springtrap this time i made him look more like how he looks in dead by daylight (if you want a more game design check out my older model) as I just thought the design was better. This will need supports…
P
Printables
Playmobil Castle Trapdoor Hinge
While model 773920 (playmobil-castle-trap-door) is a full new trapdoor, I opted to replace only the hinges. I removed the old, broken hinges using a knife and then glued the new ones in place. (And yes, the white looks not-so-good on the…
P
Printables
Tetrapod candlestick
I like the shape of tetrapods found on seawalls, so I designed a candle holder like this. Classic tall candles, 20mm in diameter, fit perfectly. If you like it, grab it.
P
Printables
Bagpipes Watertrap, Experimental
Watertrap cylinder with 18,5mm diameter that is connected with a 10,0mm (inside diameter) hose to the blowpipe.
P
Printables
Dark souls 2 - Pharros' lockstone contraption (miniature 32mm wargaming tile)
A miniature tile of the "Pharros' doors" (Pharros' contraption) from Dark Souls 2. Made for miniature wargaming tabletop games. This model is based off of its appearance in Dark souls 2: X&Y size: 32mm x 32mm (should be standardized…
P
Printables
Version 2.1 of my pico paddles for morse code, includes wrist/leg strap mount.
This is version 2.1 of my wrist mounted paddles. Embedded magnets allow for flexible mounting options. It's a minimal hardware design, requiring just a few screws, a stereo jack, and magnets. All parts are listed with links in the…
P
Printables
Ratchet Strap Holder
Ratchet straps have a very high Barrel of Monkeys Coefficient. I tend to spend more time untangling them than actually hooking them up and using them. This organizer fixes that, making it easy to wind and store them. Ratchet and short end…
P
Printables
Roof Gutter Debris Trap Basket (Gaiger) – 80 mm Opening, 50 mm Depth
A custom replacement debris‑trap basket for Gaiger roof water collectors. Fits an 80 mm opening with 50 mm depth.
P
Printables
UDR Limit Strap - Multi Length
Limit Straps for the TRAXXAS UDR. Included two versions and various lengths. The FDM version provides a nice flat base and can be printed without supports, the OE version more closely follows the original part from TRAXXAS and will…
P
Printables
Flipframe Trapeze - String Flip Toy (Astronaut / Robot)
This is a small, mechanical string-driven flip toy inspired by classic desk toys (Tricky Trapeze) and simple kinetic mechanisms. Pressing the two side buttons twists the string just enough to flip the character cleanly over the top bar.…
P
Printables
Ghostbusters Ghost Trap (1984)
First released in 2016! TRAP ARCHIVE.ZIP This is for anyone who made a trap before Feb 2022 and needs to reprint old parts - included in download. PARTS Assembly hardware, greeblies, labels and Electronics Guide are available in my shop -…
P
Printables
Meta Quest 3 Audio Enhancer Clips – BoboVR & Original Strap (Small & Large)
Description Anyone who owns a Meta Quest 3 knows this trick: cupping your hands slightly behind your ears instantly improves the sound. These audio enhancers are designed to recreate that effect — permanently and hands-free. The clip-ons…
P
Printables
Headlamp Hanger 26mm Strap Coast
Headlamp hanger for units with head strap width of 26mm or under. Sized for attaching with two small command strips or two screws 40mm apart. Pictured in use with Coast headlamps. Print as pictured. No supports needed.
P
Printables
Strapped Box V1
This box uses straps anchored to the bottom and top for hinges and latches to prevent layer separation under heavy load. Larger boxes have a handled top option. The Field Box-Bottom Shell InnerTabbed doesn't work with the Field Box-Top…
P
Printables
Masterful Dungeons Floor Traps – Stone
Masterful Dungeons Floor Traps are designed as part of the Masterful Dungeons modular dungeon system. These tiles introduce interactive and hidden hazards into dungeon layouts while remaining fully compatible with the double-sided tile…
P
Printables
Empire Vents Paintball Mask Proflex Strap Clip
These clips will allow you to easily use a Proflex (other other "universal") strap on the Empire Vents family of masks (E-Vent, E-Flex, Helix). The stock mask clips could also be used, but have two issues: 1) You need to cut off the…
P
Printables
Giro Article Goggle Strap Holder
I needed a new holder for a strap by Giro Article goggle. There are no new straps that you can buy, so needed to help myself. I decided to make it more resilient with more pins that hold the strap. The original desing from Giro is really…
P
Printables
Multipurpose straps, adjustable & modular
This is a set of straps You can use these to hold a bunch of stuff together like wires or use them for cosplay purposes, etc. You can fold these in many different ways for different tasks and combine them together in many other ways.…
P
Printables
Strap modular parts
This is a set of parts for my modular cable ties & straps Available here: and here: Combine these with the straps for various different uses: attaching straps together, making loops, separating cables, reinforcing, etc. Many variations…
P
Printables
Hook for kayak wheels with 1" strap
I bought some cheap kayak wheels from aliexpress. They came with one strap that you somehow had to use to secure the wheels under your kayak. I dedicated two 1" straps to the wheels. Now I can just hook the straps to the wheel frame. The…
P
Printables
Yet Another Selective Asian Hornet Trap - Encore un Piège à Frelon Asiatique Sélectif ! - (parametric)
Il s'agit d'un remix d'un peu tout ce que j'ai rencontré sur le Net. Comme rien ne me convenait, je suis reparti de 0 dans l'idée de proposer une solution configurable. Le fichier paramétrable est réalisé avec Solidworks 2020, il est donc…
P
Printables
G-Shock NATO Strap Adapter (GW6900)
A adapter to replace the resin adapter that connects a NATO cloth strap to the body of a GW6900 G-Shock watch. I made this because the other models that I found broke after some time, and I wanted to make a larger version in CAD.…
P
Printables
Fruit fly trap / Fruchtfliegenfalle
Simple adaption of the well known vinegar filled traps for fruit flies, just sized to fit an empty Hipp baby food jar. Printed well on a resin printer. Its a tight fit, if you use a quite brittle resin you may want to scale it by a few…
P
Printables
Straight Ratchet Strap Cargo Protection
Straight Ratchet Strap Cargo Protection Designed for a heavy 50mm 5T ratchet strap. I designed it because I don't want the ratchet to scratch my boat. I have printed it in PETG but you could also use TPU. On the photos you can see I put…
P
Printables
Lego Compatible (18945.dat) Technic Panel 5 x 11 Trapezium
This model is compatible with the lego system.
P
Printables
Flexible strap / hinge - TPU
Part of my strap designing, I had the idea of this being printed in TPU. It worked great as a 'hinge' to keep a storage box from getting misplaced.