1 / 9
Customizable Backpack Strap Cylinder Clip — zdjęcie 1
1 / 9

Customizable Backpack Strap Cylinder Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Download the included sizes or customize the Parameters in Fusion 360. Just name the item diameter and strap width.

Ocena
4,75 / 5
Polubienia
336
Pobrania
428
Wydruki
4
Wyświetlenia
3912
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Adapt any cylinder to any strap on your backpack with this parametric design.

Suggestions welcome! 

If you want me to include a custom size in the files, just let me know in the comments and I'll add it. What items do you want to attach to your backpack, purse, or lanyard?

Ideas:

  • Attach to lanyards, backpack straps, and purses
  • Pens, Pencils, Markers
  • Cans and bottles
  • Fishing rods, Hiking poles, Ski Poles, and Ice Axes
  • Camp Trowel and other gear handles
  • Flashlights and Headlamps
  • Add yours in the comments!

pre-sized files:

Strap Width (mm)Item Diameter (mm)Use
2024.5Skilhunt H04 RC Mini Headlamp
2025.8Camp Trowel (For Turtle Time)
2016Hiking Pole / Chapstick
209.5Pen
2018Maglight
2045Bugspray
3845Bugspray

I've included several pre-sized files for your convenience, but if you need a custom design, open the *.f3d file in Fusion 360, click Modify → Change Parameters.

Adjust the strap width and the item diameter to suit. You might want to reduce the diameter by a few 0.1 mm for a snug fit.

Printing Notes

  • You'll need a little support in between the strap slots. Use a flush cutter to remove.
  • ASA or PETG are probably better choices than PLA, but I've had good luck with it.
  • The included *.gcode files are for an 0.8 mm nozzle.

Tagi