i-Boxx 72 Gridfinity Baseplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity baseplate for Sortimo/Bosch (and others) i-Boxx 72 boxes
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 205
- Wydruki
- 0
- Wyświetlenia
- 888
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a simple 8x6 Gridfinity baseplate for use in an “i-Boxx 72” container.
The bins for this should be 63mm (or 9u) high (make sure to account for any stacking lips or similar which add to the total height of generated bins).
Since this is too big for the buildplates of most common printers, theres a version which is split into 4 parts. You can either download the stl and split the parts in the slicer yourself, or you can import the 3mf into PrusaSlicer which has the parts already pre-separated onto three buildplates (tested/works with PrusaSlicer 2.9 and up). After you have printed parts, use some glue to hold the pieces together.
If you want to print the whole thing in one go, grab the stl for bigger buildplates and make sure your printer can print objects of at least 338x260mm size.