1 / 5
Back Rub Ticket (Snap or Flex)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give your SO exactly what they need this Valentine's day: A coupon for a back rub!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 50
- Wydruki
- 3
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (19)Powiązane
Back rub ticket.
Updated to Rev1 to make “GOOD FOR” the same depth as “BACK RUB” so that they are equally pronounced.
*If printing the single ticket "ticket-rub-Rev1" .STL model, scale JUST the Z-axis to 60% for best thickness.
5 walls for top/bottom seems good (Ender 3 Pro)
2/8/25
- Currently attempting 25% Z-Axis scale as a thin, foldable version if arranged in a row of 4 and will add 3MF file if successful.
- 25% too thin, 50% scale too thick. Trying 33% Z-Axis scale. The 25% was very cool, it bent like actual arcade tickets so I'm on to something here. Hope to share new a new model with a strip of 4 tickets soon. Stupid Ender 3 having trouble with being level… again.
2/9/25
- Found 60% is lowest Z-axis scaling possible while preserving the backside heart engraving (at 0.2mm layer height)
- Posted 4x version gcode / project file / photos
- Made thinner “Flex” version with hearts only, doing test print.
- Flex version worked well, photo uploaded. Heart quality could have turned out better.
2/10/25
- Added .STL for SNAP 4x strip of backrub tickets
- Updated gcodes for 0.12mm and 0.16mm layer height SNAP tickets - text looks best on these rather than the 0.20mm
- Removed 0.16mm gcode, updated 0.12mm gcode with 60% z-axis scaling