Liczymy pasujące modele…
Rubber band gun thing: Something i was planning to finish for a while but had been stuck on my hard drive for too long, It's a pretty simple design with an escape mechanism that shoots rubber bands when you pull the trigger. UPDATES : Feb…
This is a brass brush nozzle scrubber with a bucket for Voron 2.4. It has 2 parts which connect together with standard 6x3 Voron magnets. Printed without support. Designed to fit 300mm Voron 2.4 but could be used in 250mm or 350mm Voron…
Instructions: Print flat on build plate at 0.2mm. No supports/brims needed Let build plate cool sufficiently before removing from bed. To assemble: Flip it so that the protrusions face down Bend the vertical stabilizers up 3. Adjust the…
Made it to lay flat on the print bed and smoothed the wall
The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…
Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate.
Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…
I stretched the duck width-wise to make it wider and more stable in the water. I think it also looks better this way since most rubber ducks I've seen are quite wide and look almost round from above. The attached 3mf file is prepped with…
Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
Atlas Rubic Cube Holder for standard 56mm 3x3 Rubic Cube (should hold other cubes in similar dimensions as well, like the larger metal puzzle cube picture). Requires minimal Support for the Head, Butt and arms. If your printer does…
***OUTDATED VERSION*** Find the new model here: This is an update to the Mag Fed Mini Rubber Band Gun. I have redesigned four parts to stop the back hook from jamming when pulling back the slide. The parts changed are the Grip, Insert,…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water New version here with print in place jointed legs…
This model is a remix of another glider but I wanted to make it faster so I designed a hook for it. I went through 4 iterations of the hook to make it strong enough to withstand hard impacts. I've printed more of these than I can count,…
Updated version of the MKI which fixes some issue with slicing, tolerances for easy print etc. Introducing “The Elastic Eagle MK II” - This is a rubber band pistol that doesn't need any assembly. I found many 3d printable rubber band…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…
***OUTDATED VERSION*** Find the new model here: I have spent a few years iterating this project. Finally it is fairly simple and reliable. This rubber band gun shoots bands from a MAGAZINE. It uses small “rainbow loom” bands, which allows…
Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…
A remix of a very simple design, I increased the shoot per load from 3 to 4. I also made hollows in the body to decrease material usage. There is also a notch for adding an optional small rubber band, inside the body and trigger, hidden…
Źródło oznaczyło ten model jako treść 18+.
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
This Rubber Band Powered Paper Plane will soar through the air, perform awesome stunts and more! An awesome toy for the Great Outdoors and even inside! (with caution) Materials: THIS Paper Airplane (…
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…
Print with PETG and take different color for the Fuselage. Use kitchen elastics for Slingshot. Build instructions: First put Wings in the Fuselage Then, Input 2x m8 nut into Eagles eyes (its purpose of weight) and build parts together. It…
UPDATE 12/2025 As some users reported that the springs become weak after a while, I reinforced them. I didn't test them so far, as my original version still works fine. But I hope, this improves the model and I'm looking forward for your…
A dive into the past, we all had one in our younger years... well most of us anyways. You'd be lucky to find one in between all the NERF guns in the isles today. I was having trouble finding one, so it was time to hop on CAD and make my…
print in 0.1 to 0.3 layer height, prob best with petg or pctg but used bambulab pla+ basic print in place recommended: print with brim and supports works the best
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
Rubber Duck in Voronoi Style. I don't think it swims well in water, but it would be nice to print anyways! Category: Animals
An attempt to make a rubber band powered plane. Easy and quick print. Doesn't fly well though. It might need a lot more thrust. I hope some of the ideas are useful to others. To assemble, run a rubber band through the prop, insert the…
Easy to print and perfect for any hoodie! A chic accessory for fashion-conscious people. 😅
Loved this design, wanted it to make a Valve cover! Can be tight to get on the valve stem at first but keep it nice and straight and it goes on great! Printed this in Yellow PLA at 0.3mm with a little bit of variable layer height on the…
The pre-painted multicolor version for the AMS is available here: https://makerworld.com/en/models/112578#profileId-120559 This version doesn't have enough clearance to be used on all keys, so keep it to a corner if you can. I have a…
This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…
UPDATED to V4. Combined fuselage and hub into one part so glue is no longer required. Simply twist the rotor into a propeller shape using a lighter or hot water then insert the rotor into the fuselage. I recommend using size #8 rubber…
Simply push the original Prusa anti-vibration feet into the prepared hole — it fits snugly and stays in place without the need for glue. Print it without supports! For the Core One L, the feet are compatible, but only with a single screw…
This customizable rubber stamp prints easily in TPU. Stretch it over the nubs on the handle and you are ready to print! I used block print ink rolled out on a piece of glass for inking the stamp, but a conventional stamp pad should work…
I used Blender to remove text from the parts that had it. I've included the original files from the model in case anyone wanted to mix and match parts or if they want to start from scratch. You can read stuff from the original Tic Tac Gun…
The current mount contains very thin walls, therefore it is very fragile, I redesigned the mount, now it is monolithic.
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
NEW: Nevermore Mini - Basic Assembly (5020) It doesn't need any complicated electronics - just connect a fan you already have (5020, 5015 or 4028) and experience filtration just as good as with all the fancy electronics and sensors!…
This rubberband butterfly toy is a fun and engaging way to entertain children for hours! Simply wind up the rubber band and watch as the butterfly flutters its wings and takes flight. Perfect for outdoor play or indoor fun, this…
Rubik's Cube Stand Category: Puzzles
Make sure to generate supports when printing!
This was the longest design I have ever worked on. I started the Rubik's Cube design about a year ago and have attempted this print with 1 other printer. No success. I then scrapped the design and started over. This design has less flaws…
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
Inspired by a shirt worn by Sheldon Cooper on the Big Bang Theory, I've designed a Melting Rubik's Cube ;) This is a 5 color print for the Multi Material Upgrade 2.0. A single file for manual painting is also included. Print instructions…
3D print your own squeaky toy! To celebrate the launch of "The Squeaker!", a fully 3D printable squeaker by @SpoolDesigns , I sculpted a rubber duck to turn into a squeaky TPU duck! Learn more on my website:…
Easy to print Rubber band toothpick bow You can use any toothpicks up to 2.7mm diameter (The barrel hole is 2.8mm). Recommended rubber band dimensions = (1.5mm thick - 50mm diameter). Even larger or smaller rubber band works. There's 4…
There are two verisons. The first prints in one color and has to be painted or stickered afterwards. The second version (All files with "Multicolor" at the end) Is for people who can print with different colors and doesn't require any…
After designing my business card glider , I decided to try an all 3D printed design. Taking a lot of inspiration from exosequitur's collection of gliders , I came up with this smooth gliding design that just fits on the bed of a Prusa…
Everithing is 0,3. only wheel is 0,10(not important) and screw is 0,20. When printing barrel use 60% infill for barrel and straight pattern. Barrel can bend on pressure. Added bolt with smaller radius to fit better.
27 piece rubiks cube you can 3D print. I made this model by tutorial from YouTube.
model in fusion 360 , printed PLA at 300 great fun
NOTE: The STL of this model is free for non-commercial use - you are free to print as many as you want for yourself or friends, so long as there is no monetary exchange. Feel free to use this model as a basis for remixes to make grips of…
Since I always get asked if I 3d print guns... I decided to design a rubber band gun (for Anna). You need: 8 times M4x10 screws 2mm diameter metal pins: (or 2mm thick nails) 3 times 25mm long 2 times 10mm long Download the barrel from:…
I changed all of the tolerances to make the print easier. I've also made the trigger thicker to be more stable!
A set of several Baby's Breath (Gypsophila) twigs perfect for creating or adding detail and body to your tabletop trees, shrubs, or other flora! The PLA is thin enough to easily heat and bend into whatever shape you want, and they look…
Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…
*** 16/08/2023 added another version of the Blade.*** Hi there, I designed this knife to be used in airsoft. Therefore, for your own safety and especially the safety of others, print the blade only out of flexible materials like TPU. Not…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Simple self draining tray to hold a round Scrub Daddy or other 100mm dia. x 40mm wide sponge. Feet at the back prevents it from sliding into the sink and a lip at the front drains water back into sink. Position at the back of the sink…
New "shoes" for Ender 3 V3 SE/KE (maybe older versions of Ender 3 too). They use the original feet as fix points and stabilize ever further the printer giving it larger footing and better clearance. The kind of flexible filament you'll…
2/28/21 update Just updated the instructions file to fix a typo and try to keep people from attaching the stock upside down This is a lever action rubber band gun that fires size-19, 1/16 rubber bands. Check the instructions.pdf file for…
Disclaimer: This is not an easy plane to build, and I didn’t get it fully working. Use this as inspiration only or as a basis for a new design This is a small rubber band powered airplane that uses very little filament and can be printed…
fully 3D printable rubix cube
Big thanks go to Anton Granata for his awesome design!! This is a haptic version of a Rubik's Cube to play without having to look at the colors. The idea this design is based on is to enable people that are blind or visually impaired play…
Update 04/14: Revised design to have a flush bottom eliminate the need for supports if you have good bridging capability :) Vertical drying rack for one or two scrub daddy sponges. The grove on the bottom matches my sink but included the…
Simple stand that blends in well with the real Rubik brand stands. Feel free to customize or add text to the blank spaces.
Remix of Yet Another Apple Watch Stand with holes on the bottom for rubber bumpers (I used 10mm diameter, 3mm thick adhesive rubber bumpers)
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest design:…
Introduction This rubber band gun is based on the clever trigger mechanism used in “M1911 Rubber band gun” (https://www.thingiverse.com/thing: 3053501) and “MINI rubber band pistol” (https://www.thingiverse.com/thing:2740883). The goal…
Here is a Duck i Designed for fun on Tinker CAD. hope you enjoy! NOTE: some people have mentioned that the duck only floats sideways. I believe it's because it's top heavy. Printing it hollow, but adding a few layers of thickness may…
I updated all files that were in giant dimensions and reduced the size of the wings a little to better frame Use 100% filling with some hard material and with thin layers, as this model has small and precise parts that fit together, after…
NEW AND IMPROVED! 23 Dec 2020 I've updated all the files here with newer better dice! I've included supported and unsupported files. These are designed to be printed in resin, if you're doing them in FDM you might want to split them and…
External parts/equipments: Rope (about 30 cm of rope - diameter 1-4 mm) rubber-band (you can add as much as you like but it would be so much hard to pull). Tape(recommended) (this would be to put in in the paper plane rear part for best…
A great and easy to print Rubik's cube holder. No supports are needed if printed in the correct orientation (same as images). I uploaded a version with chamfered edges for better print results. Set z-seam to "sharpest corner" to avoid…
A remix of a mounting arm I found in the Voron Discord. Unfortunately I don't know who created this. I made this one from scratch and also added the step. You need 2xM3x12, 2x extrusion nuts and 2 heat inserts. You can find some example…
5/10/23 update: I also created a new alternative remixed version using toothbrushes/brass bristle brushes that looks like this, which you may prefer if you don't like the paper towel solution in this design. If you have a spare…
A rubber duck snowball maker.
Filament: Soft TPU or Ninjaflex or Buy it on Aliexpress
The Scrub Daddy! It's the Apple phone of sponges - overpriced but seemingly for good reason. I hated leaving my Scrub Daddy sitting looking pitiful on the counter top; so what did I do? I went a made a nice little mount for him! (Or her…
3 knock down targets for rubber band guns. May also work for airsoft bb's, but the targets are designed to fall over with very little force. For best results, mount the base down or add weight to it to help keep it stationary. If you…
A holder for your Scrub Daddy with ergonomic drain
These guide rings will help correct the crooked x axis belt and reduce fraying of the belt. Prolonging the life of the belt. You will need to print 4 rings total. 2 for each pulley that is on each side of the x gantry. The left one is…
good rubber duck
This model is a fully functional cube that does not require support material to print. The files are in the recommended printing orientation to avoid supports. You can print all the parts in PLA, but it is recommended to print the clip in…
rubber duck with a top hat Reupload from https://www.thingiverse.com/thing:2992916
Ruby Roundhouse for the Prusaprinter competition. Some company for my Bravestone. I will definitely finish the split version, but due to the deadline I didn't make it, hopefully you will like it ;) JUMANJI !!!
These are all designed to print in vase mode. It's a really quick upload so a couple might be upside down, they're meant to be printed spout-down. :) A few folk have asked me how I made these, so I've uploaded the fusion 360 files to my…
6 Shot rubbber band desert eagle. Prints in 4 flat sections, plus the pins to hold it together. Can be printed from any material but for longevity i suggest printing the sides and the pins from PETG or ASA. The pins have been designed for…
