Rubber Band Powered Glider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this model thinking of something simple to print and effective when flying.
- Ocena
- 0 / 5
- Polubienia
- 136
- Pobrania
- 1298
- Wydruki
- 0
- Wyświetlenia
- 5731
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I updated all files that were in giant dimensions and reduced the size of the wings a little to better frame
Use 100% filling with some hard material and with thin layers, as this model has small and precise parts that fit together, after printing join the parts with glue, do not forget the propeller pin that has to be between the two parts of the propeller and the body of the plane.
I planned all parts so they don't need support.
If you want to increase the power of the propeller, place two or even three rubber bands depending on the hardness of the material used for printing.