1 / 4
Prusa XL Filament Bypass For PTFE Tube Couplers — zdjęcie 1
1 / 4

Prusa XL Filament Bypass For PTFE Tube Couplers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bypass that frictiony filament sensor

Ocena
5 / 5
Polubienia
18
Pobrania
57
Wydruki
1
Wyświetlenia
607
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

🟩 🟦 🟦 🟪 🟥 🟧 🟨

I have previously made a filament bypass using PC4-M6 PTFE connectors, but sometimes its difficult to thread filament through two back to back connectors, so I re-designed it to use proper PTFE couplers.

This model is designed to use the “PTFE Tube Coupler” from Bambu Labs website, which conveniently come in 3 packs. After printing you can carefully push fit the connectors as pictured into the model.

You should use PETG as this needs to flex a bit for insertion. I used organic PLA supports in the Prusa XL configured file supplied which worked well enough, but maybe you have a better support solution.

If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!

🟩 🟦 🟦 🟪 🟥 🟧 🟨

Tagi