Prusa XL Filament Bypass For PTFE Tube Couplers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bypass that frictiony filament sensor
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 57
- Makes
- 1
- Views
- 608
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
🟩 🟦 🟦 🟪 🟥 🟧 🟨
I have previously made a filament bypass using PC4-M6 PTFE connectors, but sometimes its difficult to thread filament through two back to back connectors, so I re-designed it to use proper PTFE couplers.
This model is designed to use the “PTFE Tube Coupler” from Bambu Labs website, which conveniently come in 3 packs. After printing you can carefully push fit the connectors as pictured into the model.
You should use PETG as this needs to flex a bit for insertion. I used organic PLA supports in the Prusa XL configured file supplied which worked well enough, but maybe you have a better support solution.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨