Space saving generic Plier holder(s) for Multiboard / Multiconnect
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very simple, space saving generic Plier holder(s) for Multiboard / Multiconnect.
- Ocena
- 4,5 / 5
- Polubienia
- 64
- Pobrania
- 416
- Wydruki
- 2
- Wyświetlenia
- 1459
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
These very simple holders use far less space (1 Multiboard ‘unit’ / 2.5cm wide) than other plier holders that mount the pliers flat on the wall. They will work for most normal sized pliers.
2 versions attached:
- 15.5mm - ‘normal’ pliers
- 19.5mm - for pliers with over molded handles
And yes of course you could call this model a pen holder as well… :-)
This holder uses Multiconnect connectors. 2 of them is sufficient.
Multiconnect is much stronger than Multipoint. The connectors are tool-less and very easy to move. The model locks the connectors securely in place.
I prefer these connectors. Thanks @JLokrin!
Printing: Models are in the right orientation - no support(s) needed but you will need good bed adhesion.