1 / 3
Replacement Wheel for Milwaukee 31-01-0860 Floor Tool — zdjęcie 1
1 / 3

Replacement Wheel for Milwaukee 31-01-0860 Floor Tool

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement wheels for the Milwaukee 31-01-0860 floor tool for 0882-20 compact vacuum

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement wheels for the Milwaukee 31-01-0860 Floor tool.   This tool comes with the 0882-20 Compact Vacuum.

We use ours in our house and the wheels got stuck over time due to normal crud like dust bunnies / dog hair etc.   We didn't know they were stuck and they ended up having a flat spot wore onto them. 

The ones I printed in PLA had a bore of 3.1mm for a shaft diameter of 3mm.   After print, I couldn't get them on and had to drill them out with a 3.175mm / 1/8" drill bit.   The current uploaded STEP file has a bore of 3.4 to allow for some variation and shrinkage.   Recommend test print maybe 2mm in height and check the fit.

Wheel outer diameter is also .5mm larger than original as we found the attachment pushed a lot of larger dirt around instead of gliding over it.  Hopefully the small increase of diameter will work better.

 

Tagi