Olfa Knife: 25mm Utility Blade Holder, AVE Boxcutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A robust box cutter, designed to hold a 25 mm blade (Olfa). A great EDC tool! My favorite benchy-alt to test my printer.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 97
- Wydruki
- 3
- Wyświetlenia
- 600
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of Ave's excellent 25mm blade holder (Olfa https://olfa.com/products/25mm_hb_silver_snap_blades). I use the titanium version every day, but always wish I had another in reach. I decided to start printing them and created this remix to fix an issue I had with the ‘classic’ stl not fitting full length blades.
Credit for the original design goes to Ave.
I added a manual brim, print everything in the 3mf layout for best results. Yes, orientation is correct. Make sure you don’t print too hot for PETG to avoid ugly strings!!
To assemble,
- insert the blade into the holder like in the pictures,
- add the full circle bit to the grid side of the blade,
- then the add springy bit to the top side.
- Superglue these two together, and
- pop on the circle with the square hole.
Caution: make sure it doesn't come loose in your pocket. If the spring loses tension/breaks, it could happen.
I print with a 0.6mm nozzle and this thing could pry open anything. 0.18mm layer height makes it strong and pretty. Matterhackers red PETG is very cherry.