Olfa Knife: 25mm Utility Blade Holder, AVE Boxcutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A robust box cutter, designed to hold a 25 mm blade (Olfa). A great EDC tool! My favorite benchy-alt to test my printer.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 97
- Makes
- 3
- Views
- 600
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of Ave's excellent 25mm blade holder (Olfa https://olfa.com/products/25mm_hb_silver_snap_blades). I use the titanium version every day, but always wish I had another in reach. I decided to start printing them and created this remix to fix an issue I had with the ‘classic’ stl not fitting full length blades.
Credit for the original design goes to Ave.
I added a manual brim, print everything in the 3mf layout for best results. Yes, orientation is correct. Make sure you don’t print too hot for PETG to avoid ugly strings!!
To assemble,
- insert the blade into the holder like in the pictures,
- add the full circle bit to the grid side of the blade,
- then the add springy bit to the top side.
- Superglue these two together, and
- pop on the circle with the square hole.
Caution: make sure it doesn't come loose in your pocket. If the spring loses tension/breaks, it could happen.
I print with a 0.6mm nozzle and this thing could pry open anything. 0.18mm layer height makes it strong and pretty. Matterhackers red PETG is very cherry.