Biqu Micro Probe Adapter For Ender 3 Dual 5015 Fan Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little adapter to fit Biqu Micro Probe
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The original model is made for CR Touch but I used it with BL Touch for a while with very little success.
I wanted to switch to the more reliable Micro Touch from Biqu but it's extremely small compared to the others, so I had to make an adapter to bring it closer to the bed.
The adapter connects to the print head body using 2 M3x10 screws with regular nuts sliding in from either side to lock it in place.
The probe attaches similarly from the bottom, using the included M2.5x6 screws and nuts.
Tolerances are made for ABS so if you print this in PLA the nuts might be a bit loose so you'll probably need to use a spare allen key to hold it so it won't spin while tightening.
If you're using Klipper then you probably already know what you're doing, but for Marlin I had to recompile the firmware so it'd work.
Search for BIQU MicroProbe in Configuration.h. It requires a couple of options to be set for it to work, but it will warn you during compilation time if something is missing.