DPS5005 USB C Adjustable Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tiny, portable adjustable power supply based on the DPS5005 and powered by USB C PD
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 691
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A tiny, portable adjustable power supply based on the DPS5005 power supply module.
Input power is provided by a USB PD trigger module. I used this one in the “High Voltage” variant which can go up to 48V with USB PD 3.1. I suggest applying a bit of glue when mounting the PD trigger module in the case to ensure it stays in place.
Any other USB PD trigger module should also work fine. You may have to adjust the mounting for the PD trigger module in the model if yours has a different size.
The banana plug terminal holes are sized for SKS Hirschmann SEB 2610 F4,8 safety banana plug sockets.
Print in ABS. PLA also works, be careful of temperature when operating PSU at high power for a long time.
See also the Case for DPS5005 USB C Adjustable Power Supply for a protective TPU case to carry the PSU in your bag.