DPS5005 USB C Adjustable Power Supply
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tiny, portable adjustable power supply based on the DPS5005 and powered by USB C PD
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 99
- Makes
- 1
- Views
- 691
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A tiny, portable adjustable power supply based on the DPS5005 power supply module.
Input power is provided by a USB PD trigger module. I used this one in the “High Voltage” variant which can go up to 48V with USB PD 3.1. I suggest applying a bit of glue when mounting the PD trigger module in the case to ensure it stays in place.
Any other USB PD trigger module should also work fine. You may have to adjust the mounting for the PD trigger module in the model if yours has a different size.
The banana plug terminal holes are sized for SKS Hirschmann SEB 2610 F4,8 safety banana plug sockets.
Print in ABS. PLA also works, be careful of temperature when operating PSU at high power for a long time.
See also the Case for DPS5005 USB C Adjustable Power Supply for a protective TPU case to carry the PSU in your bag.